Hookset Direction — Downstream

by | Jul 12, 2023 | 3 comments

If you find yourself thinking about hooksets or how to fight and land fish, then you’ve already done something right, because fooling a trout is the hardest thing out there. Burying the hook and bringing the fish to hand is another skill set entirely, and it’s a little easier.

I’ve published a lot on Troutbitten about fighting fish. And a good fight starts with a solid hookset. We want it fast, sharp and — here’s the key — downstream.

READ: Troutbitten | Category | Fighting Fish
READ: Troutbitten | Category | The Hookset

Of course, it’s not always possible to set the hook perfectly downstream. An angler who is working flies upstream to get a good dead drift on dry flies or nymphs has the significant advantage of being behind the trout.

Fish eats. Hook set downstream. Fish on.

But other angles that we fish limit the perfect hookset. Swinging flies downstream, for example, puts us in the toughest situation for a good downstream set. So we do the next best thing.

Fish eats. Swing the rod to the side. Fish on — maybe.

Let’s break this down a bit more, thinking about why downstream hooksets matter and how to get them in a variety of river setups.

Why Downstream Hooksets Work

Trout face the current. They “breathe” and acquire oxygen by taking water through their mouth, passing it over-and-out through the gills. So, aside from the occasional back current or pocket water swirl, trout face upstream while holding or feeding. And when they take our fly, we know what direction the trout is facing — its head is upstream, into the current.

There is no doubt that we get the best hookset by pulling the fly into the fish and not away from it. Hooksets are best with the direction of the set back — into the weight and mass of the fish. Remember, we fish with relatively small hooks, with artificial, barbless flies. So as soon as a trout eats our fly, it tries to eject it. It pushes water out of its mouth and “spits” the fly. This often happens in a microsecond.

Trout know they’ve eaten something they don’t want to swallow, and they try to get rid of it. That’s why pulling the fly into the trout, setting downstream, results in many more hookups. If we pull the fly away from the fish (upstream) we are helping the trout eject the fly. Surely, we’re all lucky enough that a trout can’t get rid of the fly, or it hangs on the corner of its jaw plenty of times. But downstream hooksets result in more solid hookups. And that leads to a successful fight, ending with another trout in the net.

Photo by Bill Dell

More Advantages

Most anglers lift for a hookset, straight up to the sky. I see this all the time. They lift and try to get everything vertical. For stillwater fishing, or for very deep sections of a river, this is often a good idea. But for the vast majority of river scenarios, setting downstream is the better bet.

Downstream! And yes, somewhat upward. I often tell anglers to set toward the horizon, and around here, with mountains in the distance, that’s a good angle. Your terrain may vary, but you get the picture. For me, as soon as the fly hits the water, I’m ready to set the hook, and I almost always end up setting at the same angle as my backcast.

READ: Troutbitten | Plan for the Hookset

Setting this way keeps the trout lower in the water. And although everyone seems to love a jumping fish, most losses happen when a trout breaks the surface. Setting the hook downstream helps keep a fish in the water, with the fisherman in control. This angle also puts the fisherman in great position to get side pressure immediately, putting maximum leverage on the trout and tiring it quickly.

READ: Troutbitten | Fighting Big Fish With Side Pressure — What It Is, How to Use It

Some Troubles

I grew into fly fishing by using the same approach as I always had with a gear rod. I worked small waters by wading upstream, staying behind the trout, spooking fewer fish, getting good drifts with bait and setting downstream, into the fish when they ate it. All of these hook setting habits came naturally, because the angle I was fishing set me up for it.

But I remember trying my hand at swinging wet flies and sometimes streamers. As a young man with a fly rod, if I wasn’t fishing dries, my first subsurface presentations were based on swinging, and that happened downstream. I cast across or down and across, then let the flies swing, under tension, and I would manipulate the course and animation of the fly with mends, strips or twitches. Right away I missed a lot of fish. And I’ve come to understand there were two reasons for this. First, a swung fly rarely looks natural. It can be an attractive presentation that makes trout curious, but they don’t often commit to the fly and rather tap it or mouth it with curiosity. Second, hooksets on a swung fly cannot be downstream. And as described above, we can’t pull the fly into the trout.

READ: Troutbitten | Attractive vs Natural Presentations

When swinging flies, or anytime the fly is downstream of us, our best bet is to sweep the rod toward the nearside riverbank. Always set the hook downstream as much as possible, and for swung flies, that is bankside. When fishing nymphs under an indy, if I let the rig drift past my position, I do the same thing — I sweep the rod downstream and toward the bank. This pulls the fly sideways into the trout’s mouth.

Lifting upstream to the sky is the worst hookset when a fish is downstream of our position. This setting angle takes the fly away from the fish, pulling it out of the trout’s mouth. It also puts maximum tension on the tippet at the moment of contact and pulls the fish to the surface.

Do It

Because trout face into the current, and because a river is fairly predictable in its flow, we know which way trout are facing. We use this knowledge to great advantage, both in our approach and especially at the point of the hookset.

Set downstream, as much as possible, always.

Fish hard, friends.


** Donate ** If you enjoy this article, please consider a donation. Your support is what keeps this Troutbitten project funded. Scroll below to find the Donate Button. And thank you.


Enjoy the day.
Domenick Swentosky


Share This Article . . .

Since 2014 and 1000+ articles deep
Troutbitten is a free resource for all anglers.
Your support is greatly appreciated.

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

VIDEO: The Dorsey Yarn Indicator —  Our Best and Most Versatile Indy Choice — Building It and Fishing It

VIDEO: The Dorsey Yarn Indicator — Our Best and Most Versatile Indy Choice — Building It and Fishing It

For over a decade, my Troutbitten friends and I have fished a small yarn indicator that weighs nothing, is extremely sensitive, versatile, cheap, doesn’t affect the cast, and flat out catches more trout than any other indicator we’ve ever used. What we call “the Dorsey” is a daily-use tool that is integral to our nymphing system. We mount it on a tight line rig or a traditional leader with fly line. It floats like crazy. It signals takes and information about the drift like no other indy we’ve ever used, and it’s an unstoppable fish catcher.

Tippet Protection and Nymphing Rods

Tippet Protection and Nymphing Rods

Here’s the bottom line: You do not need an extra-soft rod tip to protect delicate tippets while nymphing. Skip past that selling point in the marketing jargon, and make your fly rod decision on the other factors that matter.

Patagonia Nymphing

Patagonia Nymphing

I don’t know another time when I approached a slot with so much confidence. Better. Slower. This was it. At the end of the fishless drift, my certainly wasn’t questioned, it was simply re-informed. “Need more weight,” I said. It was an unforgettable, prove-it kind of moment . . .

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.


  1. this is one skill I am actively working on and the preparation part, planning according to where the hook set can or will be done is making a big difference.

  2. Some of my favorite situations are those where downstream sets are impossible. Spying a likely holding location and feeling like I just have to give it a try. Usually (at least in Western mountain streams) it’s some combination of large boulders, vegetation, and water depth that prevents any approach except one from a non-ideal casting location where the angles are all wrong. And it’s true, fish often come unbuttoned in those instances. When they don’t, it can seem like a matter of luck. Still, it’s fun to take a moment before casting and ask, how will I set the hook, fight the fish if necessary, and where will I land it? It would be fun and instructive to listen to you and the TB crew describe such situations as you’ve encountered them, and how they progressed. They’re like the fly fishing versions of wacky baseball plays.

  3. Good article. Have flyfished 63 years and can honestly say I’ve never given hook set a thought. I have caught, missed, rolled, and lost thousands of trout, not to mention bass, pike, and panfish.
    Swinging wet flies, I have found that trout more often than not, hook themselves by swinging as they strike. This is emphasized when you double and even triple. The secondary fish alway hook themselves as you pressure the initial fish as you have little control over the othe flies.
    Your article is enlightening, but I suppose hook sets came naturally for me but I honestly never gave it a thought.


Submit a Comment

Your email address will not be published. Required fields are marked *

Recent Articles

Recent Posts

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

Pin It on Pinterest