Podcast: Streamer Presentations — All About the Head of the Fly — S5, Ep8

by | Nov 20, 2022 | 6 comments

 The Troutbitten Podcast is available everywhere that you listen to your podcasts.

** Note **  The Podcast Player, along with links to your favorite players is below.

The longer we toss around streamers, the more we realize that it’s the most subtle changes in presentation that make a difference. Faster or slower? Sure. But how about letting the fly free fall in the current? What about a slight cross lead before reestablishing a strike-zone path in one seam? Or let’s try sliding a streamer off the bank with a broadside look, because that often draws a strike when nothing else does.

I think most anglers start fishing streamers by casting and stripping, keeping it simple at first. And that works. But as time goes by, we realize how much control we truly have over the streamer. And we learn that making it dance, swoon or dart can bring trout charging and crashing into the fly.

Understand this: What we do with a streamer, the motions we give it and the manipulations we perform with the rod or the line start with the head of the streamer. That’s what we’re moving.

Trout care about the head position of a streamer. They recognize the head, and they feed in a way that is different from nymphs, wets or dry flies. The other fly styles are too small for a trout to care about where the head is. But there is no doubt that trout are keenly aware of the head of a baitfish. That is their target. And while chasing a moving food form, trout certainly recognize where the head is and where that food is going next.

As streamer fishermen, we should consider the head as well, because all of our animations to the fly start there. It’s our attachment point to the fly. And what we do with the rod or the line hand directly affects the head of the streamer first. It’s how we bring the fly to life.

In this episode, we talk about the head orientation of the streamer in the water — how the streamer moves with the currents or against them, and what looks more natural vs what might look more attractive. We also dig into what added weight does to the head of a streamer, how that affects the action and how that limits or enhances the presentation styles that we have available.

We Cover the Following
  • What head angle converts the most fish in the net?
  • What head angle brings the most interest?
  • Do trout eat the head first?
  • What head angle looks like a baitfish that is holding, fleeing, dying?
  • How weight in the head affects the fly and the presentation

READ: Troutbitten | Category | Streamers
READ: Troutbitten | The Old School Streamer Thing
READ: Troutbitten | Streamer Presentations — The Head Flip
READ: Troutbitten | The Meat Eater Minority — Streamer Fishing Myth vs Truth
READ: Troutbitten | Streamer Presentations — The Cross Current Strip

Now, on to the podcast  . . .

Listen with the player above, or . . .

Find the Troutbitten podcast on any of these services:

— Apple Podcasts
— Spotify
— Google Podcasts
— Amazon Music
. . . and everywhere else where you listen to podcasts.

You can find the dedicated Troutbitten Podcast page at . . .


Next Time

Season Five of the Troubitten Podcast continues next week with episode nine. So look for that one in your Troutbitten Podcast feed.

Fish hard, friends.


** Donate ** If you enjoy this podcast, please consider a donation. Your support is what keeps this Troutbitten project funded. Scroll below to find the Donate Button. And thank you.


Enjoy the day.
Domenick Swentosky


Share This Article . . .

Since 2014 and 1000+ articles deep
Troutbitten is a free resource for all anglers.
Your support is greatly appreciated.

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

Streamer Presentations — The Head Flip

Streamer Presentations — The Head Flip

. . . At close range, Bill flipped the streamer’s head by lifting the rod tip and dramatically changing the angle — so the streamer head followed. At long range, Bill mended the line to force the head flip. And that day, his head flip drew one strike after another. It’s like the trout were just waiting for it.

When a streamer changes positions in the water, it draws attention. In fact, the head flip is the most reliable trigger in my arsenal of streamer tricks . . .

Streamer Presentations — The Deadly Slow-Slide

Streamer Presentations — The Deadly Slow-Slide

The best thing about fishing streamers is how different it is from everything else we do on a fly rod. Precision dead drifts? Delicate casting and thin tippets? Forget that. Slinging the big bugs is the antithesis against what the rest of fly fishing is all about. Or at least, it can be.

Everything works sometimes. We can present a streamer at almost any angle or speed and have a fair expectation to fool a trout. This makes sense because streamers imitate baitfish, creatures with an ability to move — to dart, dive and swim through the water. And they often do so unpredictably, just like our streamers.

But there’s a particular presentation that I’ve come to rely on more than any other, lately. It mimics a more available food form for trout, but it’s not a dead drift. The line and rod hand adjustments are subtle, but the presentation is active. It’s a bank or structure approach; it gets the trout’s attention. And it’s deadly.

I call it the slow-slide . . .

Troutbitten Fly Box — The Bunny Bullet Sculpin

Troutbitten Fly Box — The Bunny Bullet Sculpin

In a world of oversized, articulated streamers drenched in flash and draped with rubber legs, the Bunny Bullet is naturally sized and tied on a single hook — with just a little disco . . .

If the average modern streamer is an exotic dancer, then the Bunny Bullet is a stay-at-home Mom who gets stuff done . . .

It’s olive. It looks exactly like something trout love, and it’s designed to look vulnerable. (It seems like an easy meal.) The cut points of the deer hair head provide the angler visibility from above, it fishes well with or without split shot, and It looks good stripped or drifted . . . . .

Troutbitten Featured in the Pittsburgh Post Gazette

Troutbitten Featured in the Pittsburgh Post Gazette

My friend, Steve, texted me yesterday to ask if I knew that my name was in the Pittsburgh Post Gazette sports section. Since my mediocre Little League baseball career ended at twelve years old, I’d figured that my chances at making the sports section of any paper were shot. But to my surprise, there it was, both online and printed in the Sunday paper.

And I have to admit that it makes me smile. I grew up reading the PPG, and I still do. As a home grown western Pennsylvania boy, I follow my Steelers, Penguins and Pirates with devotion.

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.


  1. Hi Dom
    Another great podcast. When it comes to the head position flip, from down stream orientation to upstream, especially with the mono rig, it is most easily accomplished, for me at least, if the streamer or gig is more or less directly across from me. Attempts to change head direction while fly is upstream of that direction gets harder the farther upstream the move is attempted and often turns into a vertical jig. Using regular fly line and a good upstream mend can turn the head at a point farther upstream but with the decreased sensitivity and hooking as discussed. I also assume that a direct straight upstream cast can produce only up down or slight side to head direction change.

    My questions:
    How far upstream of directly across can you effect a mono rig head flip
    and what do you do to accomplish this?

    Thank You!

    • Great episode!

      On the Rapala thing, it is indeed a last name. Bill had the pronounciation almost right, just add a proper (short) rolling r and keep all the a:s identical.

      On the subject, this summer I had a small perch take my nymph really close to me. While I was trying to gently shake him loose in the water, 4 bigger brown trout shot from behind nearby rocks and went berzerk trying to catch him. When the perch stopped struggling and running away, the trout calmed down but when I pulled on the line and made the baitfish move faster, the they started attacking him again. One actually ate him and held on for long enough for me to almost net him. I’m not sure what to make of this, but since then I’ve been trying to figure out how to mimic the movement of that baitfish, haven’t cracked it yet.

      • Lauri Rapala lived in Finland (1905-1974); he was a commercial fisherman and invented his original floating Rapala in 1936.

        https://en.m.wikipedia.org/wiki/Lauri Rapala


Submit a Comment

Your email address will not be published. Required fields are marked *

Recent Articles

Recent Posts

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

Pin It on Pinterest