Your Indicator Is Too Big

by | Nov 11, 2022 | 6 comments

** This Troutbitten article was originally published to Hatch magazine. **

Floating a couple of nymphs under an indicator is undeniably effective. In the right place and with the right conditions, flies under an indicator will outperform a tight line presentation all day long — all things have their moment to shine. But reaping the benefits of an indicator presentation takes some refinement of tactics. It’s not good enough to slap on whatever floatation device you dig up from the bottom of your chest pack. Matching the indicator with the weight to be suspended, finding a balance between the indicator and the weight of the flies (or split shot), is critical for getting the most from an indicator rig. And often, anglers choose indicators that are just too large.

There’s a heap of nymphing styles out there, but they can all be placed into two categories: tight line or indicator method. Tight line nymphing works, in part, because a skilled angler has exceptional control over the line and flies. Important too, a tight line setup is extremely sensitive. Sensitivity equals strike detection, and that puts more fish in the net.

When we add a strike indicator to the leader, we transfer control of the nymph’s downstream path to the indicator itself. The bobber, yarn, foam, etc. now does the work of leading the nymph through the drift and determining the maximum depth of the flies. By adding an indicator, we also transfer the sensitivity — the strike detection — over to the indy. And if the indicator is sized properly — if it is balanced with the weight suspended underneath — it is exceptionally sensitive.

We can learn to read the indicator’s speed against the currents and even its rotation on the surface. Every movement of the indicator signals where the nymphs are and what they’re up to under the water. When the nymphs and weight are balanced with the indicator, and when the indicator is in touch with the flies, every bump on a rock, every stall in the pocket and every trout strike is visibly marked by the indicator. But finding the right balance is important.

READ: Troutbitten | Tight Line to the Indicator — A Mono Rig Variant

Balance

The indicator dips, jiggles, rotates or dunks in response to the weight underneath. When the flies hesitate, the indicator pauses in turn (assuming there’s no slack from indicator to the weighted flies or split shot). The flies brush against some underwater vegetation, and the indicator stalls for a moment. A big trout grabs a nymph with conviction and the bobber dunks. Whatever the case, the indicator responds to the movements of the flies or the weight that carries them to the bottom.

A trout that inhales the nymph and turns back upstream will always move the indicator. Such aggressive takes move even a poorly balanced rig. But most trout don’t feed that way. Our trout are fickle creatures. They often slide left a few inches and mouth a nymph as it passes. And they might release the nymph without us ever detecting a strike. This happens no matter how skilled the angler and regardless of the chosen rig. But we can limit these lost detections by using a smaller indicator. More specifically, we should choose the least buoyant indicator as is necessary to float the weight and the fly.

Picture This . . .

A medium sized Thingamabobber suspends a single #16 tungsten beadhead nymph underneath. The bobber rides high, easily supporting the weight of the nymph. So easy, in fact, that the slight hesitations of our nymph bumping the bottom, or the soft take of a testy trout, may go unregistered. Essentially, the bobber has too much buoyancy in reserve. The bobber will move, but it may be so slight that we don’t detect it.

For contrast, now picture a small yarn indicator paired with two #12 tungsten beadhead nymphs. The yarn operates on the edge of being pulled under, and any slight hesitation, any trout taste-testing, moves the yarn visibly enough to be detected.

Too much buoyancy paired with a light payload of flies makes for an indicator that is resistant to subtle takes. It simply dips, jiggles and rotates less — it indicates less to the angler.

It’s important, then, to balance the buoyancy of the indicator with the weight underneath. Find that line where the buoyancy of the indy is overcome by the weight underneath, and then use an indicator that has a little more flotation in reserve.

READ: Troutbitten | Nymphing: Tight Line VS Indicator

Buoyancy and Indicator Types

Whether yarn, cork, foam or plastic, buoyancy is all about trapped air. It’s simple. More air floats more weight. The globe of a medium sized Thingamabobber houses more air than the same sized Styrofoam indicator. The Thingamabobber is hollow, while a Styrofoam indy is solid material with hollow pores.

That’s an important factor to remember when choosing an indicator to best match the flies and weight underneath. It’s not always about size — it’s about buoyancy.

Yarn indicators are extremely sensitive tools, and I like the ability to simply pull out strands of yarn or cut them down to a smaller size. I still prefer the simplest yarn system: a polypro macrame yarn attached with a small orthodontic rubber band, popularized by Pat Dorsey.

It’s worth mentioning that dry flies make excellent indicators. And when fishing dry-dropper, the same principles apply. Choose a dry fly that supports the weight of the flies (or split shot) underneath, but not much more, and your rig will be sensitive to the slightest takes.

All of this doesn’t have to be complicated. No, I don’t recommend changing the bobber size with every fly change, but keep these principles in mind, and make the effort to keep the indy just on the edge of going under, because that’s when it’s most sensitive.

I carry two sizes of Thingamabobbers, three sizes of yarn indys and a handful of dry flies that I use for dry-dropper. And I do my best to choose the indicator that balances best with the flies and weight underneath.

It makes a difference.

Fish hard, friends.

 

** Donate ** If you enjoy this article, please consider a donation. Your support is what keeps this Troutbitten project funded. Scroll below to find the Donate Button. And thank you.

 

Enjoy the day.
Domenick Swentosky
T R O U T B I T T E N
domenick@troutbitten.com

Share This Article . . .

Since 2014 and 1000+ articles deep
Troutbitten is a free resource for all anglers.
Your support is greatly appreciated.

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

Fly Fishing Strategies: Tags and Trailers

Fly Fishing Strategies: Tags and Trailers

Sometimes trout are feeding so aggressively that the particular intricacies of how nymphs are attached to the line seem like a trivial waste of time. Those are rare, memorable days with wet hands that never dry out between fish releases. More often than not, though, trout make us work to catch them. And those same particulars about where and how the flies are attached can make all the difference in delivering a convincing presentation to a lazy trout.

Two nymphs can double your chances of fooling a trout. But there are downsides. Here are some strategies for rigging and getting the most from two fly rigs.

Streamside | Hatch Mag Tight Line Leader

Streamside | Hatch Mag Tight Line Leader

We've gotten a lot of questions, comments and reactions to a few recent articles that we published about Sighters, Tight Line Rigs and Why Fly Line Sucks. It's cool to see so much interest. Many of the questions are about the mono rig itself, and there is definitely...

What to Trust

What to Trust

The tall man crossed the old railroad bridge above me. He paused at the midpoint, lingered and watched me cast for a moment, then he bellowed downstream to me with a voice full of triumph. “I caught a bunch! They’re taking Zebra Midges just under the surface.” “Not...

Night Shift – Into the Dark

Night Shift – Into the Dark

You can't stand up to the night until you understand what's hiding in its shadows.  -- Charles De Lint Last June I made a commitment. I promised myself that I would go deep into the night game and learn to catch the wildest trout in the darkest hours. Having spent a...

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.

6 Comments

  1. This article gives a clear argument and message — choose the least buoyant indicator as is necessary to float the weight and the fly. I have been experimenting with cutting foam indicators in half. Now I am thinking that I need to make several different sizes.

    Reply
  2. Very informative as usual, Dom. I started using the Dorsey indicators after seeing your article about them.

    Reply
    • Yeah, even a Dorsey can be too big. And I use all kinds of indys. Sometimes a solid indicator is the better option.

      Cheers.
      Dom

      Reply
  3. This is the number one mistake I see when fishing trophy water in the west. Large, brightly colored indicators scare fish. If you are watching closely, you will see the fish move away from the strike indicator. Yarn is great or the smallest size bobber style either clear or cork. You can tight line (high stick) with a very small strike indicator using the indicator to just show the line the flies are taking. Run the flies straight into the trout and strike when you see the white of the mouth or the fish turns.

    Reply

Submit a Comment

Your email address will not be published. Required fields are marked *

Recent Articles

Recent Posts

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

Pin It on Pinterest