Turnover

by | Feb 24, 2021 | 2 comments


 

It’s a word thrown around in fly fishing circles a lot — turnover. But the concept is commonly misunderstood. No matter what type of fly we’re casting, and no matter the type of leader, we need our rig to turn over. It’s the best way to accurately place the fly in the target water. But the deeper value of good turnover is more complex — it’s all about what happens further up the leader.

In short, turnover gives us freedom to choose what happens with the line that’s tethered to the fly. How does the tippet and leader land? With contact or with slack? And where does it land? In the seam and partnered with the fly, or in an adjacent current? By having mastery of turnover, we dictate the positioning of not just the fly, but the leader itself. And nothing could be more important.

Because the fly is tethered to the tippet, how the leader lays on — and lays in — the water affects everything about how the fly drifts next. Our flies have to follow the attached line. So we control leader positioning and the resulting fly direction with a good cast — one that turns over.

Turnover should happen in the air and not on the water. The casting loop unfolds above the river. It should not unroll on the surface.

There are two basic ways to practice fly casting — with weight and without. Although the casting stroke for each can be similar, the result of the line turning over is quite different. Regardless, turnover remains critically important for each.

Me and my buddy, River.

Dry Fly Fishing

I taught myself to cast a dry fly by copying some guy’s casting motions from a VHS tape in the early nineties. The instructor talked a lot about turnover, and it made pretty good sense from the beginning. If I didn’t have enough power coming forward in the cast, the line collapsed on itself, landing in a pile and a squiggly line just beyond my rod tip. But when I got the timing right, feeling the flex of the backcast and then pushing forward, my yellow fly line launched to the target — what a feeling.

Those first few practices in the yard were performed without a fly attached to the leader. And I was simply trying to land my line and leader as straight as I could toward the target.

Once I was on the river, I quickly understood the inherent problems of a line and leader laying out straight on the water. With any current at all, there was instant drag.

Fortunately, I was directed to George Harvey’s book early on. And so, right from the beginning, I grasped the concept of using extra turnover-power to the dry fly — enough so that my Adams reached the end of the line, and the reserve power recoiled into the leader, causing waves in the line that dry fly anglers called s-curves. Years later, I would learn to use this to even greater effect by employing what I now call a Stop and Drop, so I had s-curves and drag free drifts for days. Well . . . a few extra feet, anyway.

Photo by Austin Dando

When casting dry flies, turnover should happen in the air. The fly line often falls to the surface before the dry fly, because the unweighted fly has air resistance and the line falls faster. For the water and the angles we usually fish with dry flies, this is fine. But sometimes, in rolling or mixed currents, it’s important to force the line onto the water faster, then allow the turnover to unroll on the water. I call this the Crash Cast, and it’s one of the only times when turnover happens on the surface instead.

The Tuck

Like good dry fly fishing, excellent nymphing begins with turnover. And with just a little more juice pushed into that turnover, the result is a tuck cast.

When I mention the tuck cast to my nymphing students, they often argue that they’re already getting deep enough. If the fly is touching the riverbed, why would we need to employ a tuck cast?

My answer is to think of the tuck cast as more than a way to get the fly to depth quickly. Think of it as a way to more accurately control the positioning of the tippet and the leader. Because, just like the dry, the nymph or streamer must follow the tethered line, so nothing is more important than that line’s placement.

When casting weight, we have a tangible indicator of turnover — we can feel the weight of the fly reaching the end of the line. Even a small #16 beadhead nymph tugs at the leader, flexing the rod tip, which translates to our hands. More weight tugs more deliberately, and it’s easier to feel the result of a good tuck cast with a #14 beadhead or a #1 split shot.

READ: Troutbitten | Series | Know Your Weights and Measures

Turnover happens when our casting loop unfolds in the air. The weight in the fly or split shot reaches the end of the line, and the excess energy must go somewhere. Momentum and gravity both take it downward. The fly hits first, then the tippet follows. And what happens with that tippet sets up the whole drift.

READ: Troutbitten | Fly Fishing Strategies — The Tuck Cast

The tuck cast is most often thought to enter vertically, with variable degrees of acceleration. But the advanced angler uses a tuck to enter the fly at an angle that best sets up the drift. That might mean a little left or right, to accommodate water pushing around a midstream boulder. And it might mean feeding a touch more slack into the tippet, allowing the fly a more effective free fall before the drift.

READ: Troutbitten | Free Fall and the Drift

With a good turnover and tuck, the angler gains control over the placement of the whole leader — not just the tippet. If the sighter and butt section is to remain off the water, it is still critical to keep the line angle to the rod tip leading in the same seam as the fly itself. Likewise, if the sighter is floated on longer casts, it’s the turnover and tuck cast that allows us to choose the angle and position of the sighter.

Finally, if a suspender is attached, the only way to reliably place the indy in the same seam as the fly is with good turnover. The fly lands first, and with enough momentum, the indy can be kicked into place, even at cross-stream angles — but only with good leader turnover.

Photo by Austin Dando

The Future is Wide Open

Turnover. Nothing is more useful or critical to the casting stroke. Options for fly and leader placement are laid wide open and accessible with the flick of a wrist. Good turnover opens up a range of tactics to the skilled angler.

Buy Simms boots here, and support Troutbitten

Fish hard, friends.

 

** Donate ** If you enjoy this article, please consider a donation. Your support is what keeps this Troutbitten project funded. Scroll below to find the Donate Button. And thank you.

 

READ: Troutbitten | Category | Fly Casting

 

Enjoy the day.
Domenick Swentosky
T R O U T B I T T E N
domenick@troutbitten.com

 

Share This Article . . .

Since 2014 and 600 articles deep
Troutbitten is a free resource for all anglers
Your support is greatly appreciated

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

Apparel

Stickers

Books

Joe Humphreys’ book
Trout Tactics
Purchase here to support Troutbitten

More from this Category

Levels, Resets and New Beginnings

Levels, Resets and New Beginnings

The frequent chance for a purely new beginning is one of the joys of small to medium sized rivers. It keeps us hopeful. Forgiveness comes at the next level — across the next lip. This is the time for a deep breath and renewed determination. Because in the next level, over fresh trout that are unwise to our presence, all of our plans will come together. This we believe . . .

Leaders in the Troutbitten Shop

Leaders in the Troutbitten Shop

Troutbitten leaders are now available in the Troutbitten Shop. These are hand tied leaders in four varieties: Harvey Dry Leader, Standard Mono Rig, Thin Mono Rig, and Micro-Thin Mono Rig. Standard Sighters are also available, and they include a Backing Barrel. The Full Mono Rig Kit contains each of the three Mono Rig leaders.

All Troutbitten leaders come on a three-inch spool, making long leader changes a breeze.

Design and Function of the Troutbitten Standard Mono Rig

Design and Function of the Troutbitten Standard Mono Rig

Here, finally, is a full breakdown on the design of my favorite leader. It’s built for versatility without compromising presentation. It’s a hybrid system with an answer for everything, ready for fishing nymphs on both a tight line and under an indy. It fishes streamers large and small, with every presentation style. It’s ready for dry dropper, wet flies, and it even casts single dry flies. All of these styles benefit greatly with a tight line advantage.

Anglers in contact are anglers in control. It’s fun and effective, because we know where the flies are, and we choose where they go next . . .

VIDEO | Streamers on the Mono Rig: Episode 2 — Casting

VIDEO | Streamers on the Mono Rig: Episode 2 — Casting

The Troutbitten video series, Streamers on the Mono Rig continues with Episode Two, covering the unique possibilities and the demands of casting.

Fishing streamers on the Mono Rig offers anglers ultimate control over the direction and action of their flies — all the way through the drift. And while small streamers may need nothing more than a nymphing-style cast, mid-sized and full-sized streamers require a few changes in casting to get the most from the technique . . .

You Need Contact

You Need Contact

Success in fly fishing really comes down to one or two things. It’s a few key principles repeated over and over, across styles, across water types and across continents. The same stuff catches trout everywhere. And one of those things . . . is contact.

. . . No matter what adaptations are made to the rig at hand, the game is about being in touch with the fly. And in some rivers, contact continues by touching the bottom with something, whether that be a fly or a split shot. Without contact, none of this works. Contact is the tangible component between success and failure.

Streamer Presentations — The Touch and Go

Streamer Presentations — The Touch and Go

Want to get deep? Want to be sure the fly is low enough? Try the Touch and Go.

Sometimes, I don’t drift or strip the streamer all the way through. Instead, I plot a course for the fly, looking through the water while reading the river’s structure. And I look for an appropriate landing zone for the Touch and Go . . .

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.

2 Comments

  1. My wife said you need more pictures of River. See you this spring.

    Reply

Submit a Comment

Your email address will not be published. Required fields are marked *

Recent Articles

Apparel

Stickers

Books

Devin Olsen’s Book
Tactical Fly Fishing
Purchase here to support Troutbitten

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

Pin It on Pinterest