Fly Casting — Five Tips For Better Mending

by | Nov 18, 2020 | 2 comments

Mending is a bit of a lost art in fly fishing. I meet fewer and fewer people with much skill for it. And in some ways, that’s just fine. I strongly prefer setting up the angles and  curves of my line and leader in the air, rather than mending after the line touches. I also fish shorter dry fly drifts than most, and I fish upstream. While nymphing, I fish a contact rig, (Mono Rig) most of the time — even when fishing suspension tactics under an indicator. And because contact rigs are all about keeping line off the water, no mending is necessary.

With that said, there’s plenty of room for good mending on the river. And I believe that mastering all the available tools is the only way to be a consistent, happy angler who has success under any conditions.

So I mend sometimes.

I do it with a dry line the most. Mending helps when fishing dry flies at distance and at cross stream angles. And while fishing a standard line-and-leader setup with nymphs, the same applies. At cross stream angles, mending skills will make or break your day.

I was a poor mender for much of my fly fishing career. And because I had no mentors early on, it took trial and error to figure a few things out. I now pass these keys on to my guided guests who share the water with me every day. And it’s amazing how a handful of principles changes everything.

Which Mends? What and Why?

There are a few different mends to learn: upstream, downstream and stack mends are the basics. I’m assuming here that you already know these mends and have the skills to perform them. This article is about how to make theme better. Because, like me for all those early years, your on the water mending may need a tune up.

Remember, we aim for mends that provide slack to the dry or the suspender, allowing them to drift drag free for longer. And to achieve this, we lay slack on the water, somewhere around the dry or suspender. Whether upstream, downstream or to the side, a good mend provides slack on the water. It removes tension on the dry, or better yet, it prevents tension from happening at all. Perfect mends do this without ever bumping the suspender or moving the dry. Masters of this craft can drift a fly for an eternity.

Now here are my five best mending tips.

Photo by Bill Dell

Slack First

This is perhaps the most overlooked of these principles: Land the cast with some slack in the first place. Turnover is the key to all good fly casts, especially if you’re hoping for a dead drift. By turning the line and leader over with speed and good, tight loops, the fly lands with s-curves in the leader. Aerial mends help establish this slack as well, and so does the right leader design.

READ: Troutbitten | Dry Fly Fishing — The George Harvey Leader Design

READ: Troutbitten | Dry Fly Fishing — The Stop and Drop

Land with some slack on the water. Because if the line is tight, and the dry or suspender is under tension immediately, your next move will certainly skate the fly. That’s bad.

Remember, a good mend starts with some slack — without tension on the fly or the line hanging from the rod tip. This way, when you get things moving toward a quick mending stroke, there’s a little grace to perform the operation.

Land with slack first. It’s the only way.

Speed

Everything that happens next should be fast. Think crisp. Almost all fly rod motion should be swift, both during the cast and while mending. Use rod tip movement that flexes the rod and forces energy into the mend. In this way, the power of the rod does the mending and not your arm.

Slow or large arm motions usually drag line over the surface. Slow motions create more tension than relieve it. A casting stroke is efficient when it’s built with speed, and a mend is essentially a cast with the line on the water. So perform it with speed.

READ: Troutbitten | Put More Juice in the Cast

River, judging your mends. Photo by Bill Dell.

Leader Too

Many anglers seem satisfied with mending the fly line, but they miss what is more important — the leader. The fly, or suspender, attached to the tippet, follows that tippet as soon as it’s under tension. So we must relieve the tension on the leader. Because mending fly line is only half the job.

Mend with enough speed, force and enthusiasm to reposition the fly line and continue through the leader. You may not see the leader laying on the water, but good imagination combined with a lot of experience allows us to know right where the leader is. And as the leader lifts off the water, you will see it again.

Mend the leader too, or you’re just pissin’ in the wind.

Grease It

Fly line companies these days brag about the floatation of their line coatings and finishes. That’s nice. Cleaner and newer lines certainly mend better. But a little grease does wonders. And that grease should also find its way onto the leader.

I don’t always grease dry fly leaders, because in clear flats, a floating leader can spook trout. (So can mending.) I tend to fish dry flies in moving water anyway, and if my tactic calls for mending, I grease some of the fly line, the whole leader, and all the tippet up to about ten inches before the fly. When nymphing under a suspender, I grease everything up to that indy.

Favorite Grease:

Silicon Mucilin

and

Loon Payette Paste
Mend Soon | Mend More

If you wait for half the drift before realizing that it’s time to mend, it’s too late. The water is a greedy bastard. It pulls fly line and leader into the surface as soon as it hits. And that friction becomes harder to release, the longer our line is on the water.

Even a greased line is tough to pick up and mend effectively after a few seconds of suction to the surface.

So, mend as soon as the cast finishes. Even if the mend isn’t yet needed, mend anyway. Think of it as a setup mend. Then mend again, and again, and again, throughout the drift. I’d rather perform a series of short mends instead of one big mend that starts halfway through the drift (usually). When fishing mixed currents, I throw small mends almost constantly through the drift. Done artfully, you can practically dance and hover the leader over the water, leaving just some tippet on the surface. This is certainly the best way to fish pocket water with a standard line and leader.

Photo by Bill Dell

Practice

I believe it’s easier to learn fly casting than to learn mending. But each skill requires repetition and refinement to be effective in challenging situations.

Remember to start with slack. Then keep your mends small and crisp. Mend like you mean it, and be willing to make mistakes. Have fun out there.

Fish hard, friends.

** Donate ** If you enjoy this article, please consider a donation. Your support is what keeps this Troutbitten project funded. Scroll below to find the Donate Button. And thank you.

READ: Troutbitten | Category | Fly Casting

 

Enjoy the day.
Domenick Swentosky
T R O U T B I T T E N
domenick@troutbitten.com

 

Share This Article . . .

Since 2014 and 700+ articles deep
Troutbitten is a free resource for all anglers.
Your support is greatly appreciated.

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

Fly Fishing with Streamers on the Mono Rig — More Control and More Contact

Fly Fishing with Streamers on the Mono Rig — More Control and More Contact

So why do we use a Mono Rig over fly line? What’s the advantage?

Just like a tight line nymph rig, we gain more control over the presentation of the flies, and we have better contact throughout the cast and the drift. With fly line in the game, we cast and manage the fly line itself. With the Mono Rig, we cast and manage the streamers more directly.

With the Mono Rig, we can stay tight to the streamer after the cast, we can dead drift it with precision for the first five feet, keeping all the leader off the water. Then we might activate the streamer with some jigs and pops for the next ten feet of the drift. And for the last twenty feet, as the streamer finishes out below and across from us, we may employ long strips. All these options are open . . .

High Light — Low Light

High Light — Low Light

My article, "High Light -- Low Light," is over at Hatch Magazine. Here are a few excerpts..... -- -- -- -- -- -- -- -- -- -- ... Finding the shady cracks that harbor resting and wary trout is a good challenge on bright days. Offering the flies to them in those small...

Tight Line Nymphing with an Indicator — A Mono Rig Variant

Tight Line Nymphing with an Indicator — A Mono Rig Variant

I dislike arbitrary limits. Placing restrictions on tackle and techniques, when they inhibit my ability to adapt to the fishing conditions, makes no sense to me. I’m bound by no set of rules other than my own. And my philosophy is — Do what works.

I guess that’s why I’ve grown into this fishing system. Most of the time I use what I refer to as the Mono Rig. It’s a very long leader that substitutes for fly line, and I’ve written about it extensively on Troutbitten. Tight line and euro nymphing principles are at the heart of the Mono Rig, but there are multiple variations that deviate from those standard setups. Sometimes I use split shot rather than weighted flies. Sometimes I add suspenders to the rig. I even throw large, articulated streamers and strip aggressively with the Mono Rig. All of this works on the basic principle of substituting #20 monofilament for fly line.

Tight line nymphing is my default approach on most rivers. I like the control, the contact and the immediacy of strike detection. But sometimes adding a suspender (an indicator that suspends weight) just works better.

Often, I add a dry fly to my tight line nymphing rig. “The Duo” (European fishermen’s term for dry/dropper) is widely popular because it’s a deadly variation of the standard tight line approach. But dry/dropper rigs have their issues. And choosing a Thingamabobber or a Dorsey Yarn Indicator for the suspender not only solves those issues but also includes extra benefits.

This isn’t about which method is better. Invariably, the answer to such questions in fishing is, “It depends.” Everything has its place. This is about how to use tight line principles with a suspender rig. I hate arbitrary limits. Do what works.

Kinda Slow

Kinda Slow

I was either born or raised with an abundance of fishing optimism.

. . . No matter the situation, I have an ability to regroup and believe in big possibilities again. Within a few hours of making it home and saying to my sons, “It was kinda slow,” I’m ready for more. After a bowl of cereal and a few talks with friends, after a couple flies tied with something just a little different than last time, I always find a reason to believe the next trip will be better . . .

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.

2 Comments

  1. Great article! I was fortunate enough to have a mentor that fished almost only dry and all of his lessons were more about mending than anything else. One thing that has stuck with me was what he did when nothing was biting. He would say “these are the days when you practice technique”. Figure our where to stand, cast and how to mend to cover a spot drag free on the slow days. You can’t learn this on the lawn.

    tight lines

    Reply
  2. For dry fly i use a long thin tippet section.Not sure the the names of certain casts.Maybe a reach mend.I also have it land with lots of slack & coils of tippet.I fish for grayling often & fish downstream dry fly often for grayling.It’s easier if they see your fly before the tippet.Domenick what do you do with mending your bobber on a mono rig.I tend to just high stick as much line up to the bobber.I tend to find bobbers catch great sometimes.Then other times they are hopeless.I only really use them when too windy to tightline nymph.

    Reply

Submit a Comment

Your email address will not be published. Required fields are marked *

Recent Articles

Recent Posts

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

Pin It on Pinterest