Fly Casting — Five Tips For Better Mending

by | Nov 18, 2020 | 2 comments

Mending is a bit of a lost art in fly fishing. I meet fewer and fewer people with much skill for it. And in some ways, that’s just fine. I strongly prefer setting up the angles and  curves of my line and leader in the air, rather than mending after the line touches. I also fish shorter dry fly drifts than most, and I fish upstream. While nymphing, I fish a contact rig, (Mono Rig) most of the time — even when fishing suspension tactics under an indicator. And because contact rigs are all about keeping line off the water, no mending is necessary.

With that said, there’s plenty of room for good mending on the river. And I believe that mastering all the available tools is the only way to be a consistent, happy angler who has success under any conditions.

So I mend sometimes.

I do it with a dry line the most. Mending helps when fishing dry flies at distance and at cross stream angles. And while fishing a standard line-and-leader setup with nymphs, the same applies. At cross stream angles, mending skills will make or break your day.

I was a poor mender for much of my fly fishing career. And because I had no mentors early on, it took trial and error to figure a few things out. I now pass these keys on to my guided guests who share the water with me every day. And it’s amazing how a handful of principles changes everything.

Which Mends? What and Why?

There are a few different mends to learn: upstream, downstream and stack mends are the basics. I’m assuming here that you already know these mends and have the skills to perform them. This article is about how to make theme better. Because, like me for all those early years, your on the water mending may need a tune up.

Remember, we aim for mends that provide slack to the dry or the suspender, allowing them to drift drag free for longer. And to achieve this, we lay slack on the water, somewhere around the dry or suspender. Whether upstream, downstream or to the side, a good mend provides slack on the water. It removes tension on the dry, or better yet, it prevents tension from happening at all. Perfect mends do this without ever bumping the suspender or moving the dry. Masters of this craft can drift a fly for an eternity.

Now here are my five best mending tips.

Photo by Bill Dell

Slack First

This is perhaps the most overlooked of these principles: Land the cast with some slack in the first place. Turnover is the key to all good fly casts, especially if you’re hoping for a dead drift. By turning the line and leader over with speed and good, tight loops, the fly lands with s-curves in the leader. Aerial mends help establish this slack as well, and so does the right leader design.

READ: Troutbitten | Dry Fly Fishing — The George Harvey Leader Design

READ: Troutbitten | Dry Fly Fishing — The Stop and Drop

Land with some slack on the water. Because if the line is tight, and the dry or suspender is under tension immediately, your next move will certainly skate the fly. That’s bad.

Remember, a good mend starts with some slack — without tension on the fly or the line hanging from the rod tip. This way, when you get things moving toward a quick mending stroke, there’s a little grace to perform the operation.

Land with slack first. It’s the only way.

Speed

Everything that happens next should be fast. Think crisp. Almost all fly rod motion should be swift, both during the cast and while mending. Use rod tip movement that flexes the rod and forces energy into the mend. In this way, the power of the rod does the mending and not your arm.

Slow or large arm motions usually drag line over the surface. Slow motions create more tension than relieve it. A casting stroke is efficient when it’s built with speed, and a mend is essentially a cast with the line on the water. So perform it with speed.

READ: Troutbitten | Put More Juice in the Cast

River, judging your mends. Photo by Bill Dell.

Leader Too

Many anglers seem satisfied with mending the fly line, but they miss what is more important — the leader. The fly, or suspender, attached to the tippet, follows that tippet as soon as it’s under tension. So we must relieve the tension on the leader. Because mending fly line is only half the job.

Mend with enough speed, force and enthusiasm to reposition the fly line and continue through the leader. You may not see the leader laying on the water, but good imagination combined with a lot of experience allows us to know right where the leader is. And as the leader lifts off the water, you will see it again.

Mend the leader too, or you’re just pissin’ in the wind.

Grease It

Fly line companies these days brag about the floatation of their line coatings and finishes. That’s nice. Cleaner and newer lines certainly mend better. But a little grease does wonders. And that grease should also find its way onto the leader.

I don’t always grease dry fly leaders, because in clear flats, a floating leader can spook trout. (So can mending.) I tend to fish dry flies in moving water anyway, and if my tactic calls for mending, I grease some of the fly line, the whole leader, and all the tippet up to about ten inches before the fly. When nymphing under a suspender, I grease everything up to that indy.

Favorite Grease:

Silicon Mucilin

and

Loon Payette Paste
Mend Soon | Mend More

If you wait for half the drift before realizing that it’s time to mend, it’s too late. The water is a greedy bastard. It pulls fly line and leader into the surface as soon as it hits. And that friction becomes harder to release, the longer our line is on the water.

Even a greased line is tough to pick up and mend effectively after a few seconds of suction to the surface.

So, mend as soon as the cast finishes. Even if the mend isn’t yet needed, mend anyway. Think of it as a setup mend. Then mend again, and again, and again, throughout the drift. I’d rather perform a series of short mends instead of one big mend that starts halfway through the drift (usually). When fishing mixed currents, I throw small mends almost constantly through the drift. Done artfully, you can practically dance and hover the leader over the water, leaving just some tippet on the surface. This is certainly the best way to fish pocket water with a standard line and leader.

Photo by Bill Dell

Practice

I believe it’s easier to learn fly casting than to learn mending. But each skill requires repetition and refinement to be effective in challenging situations.

Remember to start with slack. Then keep your mends small and crisp. Mend like you mean it, and be willing to make mistakes. Have fun out there.

Fish hard, friends.

** Donate ** If you enjoy this article, please consider a donation. Your support is what keeps this Troutbitten project funded. Scroll below to find the Donate Button. And thank you.

READ: Troutbitten | Category | Fly Casting

 

Enjoy the day.
Domenick Swentosky
T R O U T B I T T E N
domenick@troutbitten.com

 

Share This Article . . .

Since 2014 and 700+ articles deep
Troutbitten is a free resource for all anglers.
Your support is greatly appreciated.

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

Podcast: The Versatile Angler — S3-Ep15

Podcast: The Versatile Angler — S3-Ep15

There are stages. There are tools. There are systems for being versatile on the water. And there’s a time for all of it.

Pursuing this kind of versatility also keeps us in the game for a lifetime. We are forever working on the next idea, refining new casts and another approach. Eventually, we develop such a facility with these skills that we begin to combine them, breaking free from the common and standard approach and landing on new ways to get a dead drift or move a streamer. Creation becomes the goal. Design becomes our drive. And experimentation leads to more answers that lead to more questions . . .

(VIDEO) Fly Fishing the Mono Rig — Casting vs Lobbing

(VIDEO) Fly Fishing the Mono Rig — Casting vs Lobbing

Turnover is the fundamental difference between spin casting and fly casting. And all good fly casts, with fly line or otherwise, allow the line/leader to turnover in the air and then hit the water. That’s the difference between casting and lobbing. Without good turnover, we are simply lobbing the line.

Remember this: lobbing is limiting. And a good casting approach, with great turnover, introduces a wide range of options . . .

Podcast: An Introduction to Night Fishing for Trout — S3-Ep14

Podcast: An Introduction to Night Fishing for Trout — S3-Ep14

Ambition is the fundamental characteristic of every good night fisher. We wade into the darkness for the experience. And we quickly realize that the night game is an unwritten book, with just a few clues and an infinite room for learning new things. Each exhilarating hit and every trout in the net is a unique reward, because night fishing requires that you assemble the puzzle yourself.

In this episode, I’m joined by my friends, Trevor Smith and Josh Darling, for an overview on night fishing for trout . . .

Casting and Drifting | Drop Shot Nymphing on a Tight Line Rig — Pt.5

Casting and Drifting | Drop Shot Nymphing on a Tight Line Rig — Pt.5

Gaining the bottom, feeling that contact with the riverbed and then gliding over it, tap, ta-tap, tap-a-tap, maybe five to ten times throughout the drift is success. But I’ve noticed that anglers tend to get complacent. Tickling the bottom is only half of the job. And that’s not good enough. We still need to find the right speed for a drift and keep everything in one seam.

Drop shotting puts the angler in ultimate control. Be aware of every element of the drift, and make good choices, because all of them are yours. Control is the advantage of a drop shot rig. Remember this always — your rod tip controls everything . . .

VIDEO: Real Dead Drifts — Up Top and Underneath

VIDEO: Real Dead Drifts — Up Top and Underneath

A dead drift is the most common presentation in fly fishing for trout, because it imitates their most common food forms. We want a dead drift on both a dry fly and a nymph. But what is it?

It’s a one-seam drift that travels at the speed of the current without tension from the attached tippet. That’s hard to achieve, but it is possible by first understanding what a dead drift looks like, both on the surface with a dry fly and below the surface with a nymph . . .

VIDEO: The Only Way to Carry a Wading Staff

VIDEO: The Only Way to Carry a Wading Staff

This wading staff system makes strong waders stronger and fast waders faster. It allows all waders to reach even more water.

If you rig a wading staff the wrong way, it slows you down. But if you rig it the right way, a wading staff opens new worlds and speeds you up.
It gives you access to places that you couldn’t wade before.

But it has to be rigged the right way . . .

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.

2 Comments

  1. Great article! I was fortunate enough to have a mentor that fished almost only dry and all of his lessons were more about mending than anything else. One thing that has stuck with me was what he did when nothing was biting. He would say “these are the days when you practice technique”. Figure our where to stand, cast and how to mend to cover a spot drag free on the slow days. You can’t learn this on the lawn.

    tight lines

    Reply
  2. For dry fly i use a long thin tippet section.Not sure the the names of certain casts.Maybe a reach mend.I also have it land with lots of slack & coils of tippet.I fish for grayling often & fish downstream dry fly often for grayling.It’s easier if they see your fly before the tippet.Domenick what do you do with mending your bobber on a mono rig.I tend to just high stick as much line up to the bobber.I tend to find bobbers catch great sometimes.Then other times they are hopeless.I only really use them when too windy to tightline nymph.

    Reply

Submit a Comment

Your email address will not be published.

Recent Articles

Recent Posts

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

Pin It on Pinterest