Feed ‘Em Fur

by | Aug 9, 2020 | 15 comments

Every once in a while, the mainstay beadhead nymphs in my box see a drop in productivity. Sometimes, it takes hours or even days of denial for me to accept the message. First, I try going smaller, into the #18 and #20 range, focusing on black beads and duller finishes that have mixed, mostly subpar results. Then eventually, I flip over a leaf in my fly box, where, on the backside, I have rows of natural nymphs. They carry no bead and have minimal lead wraps on the shank for weight. These are subtle, unassuming flies, and their main attraction is an inherent motion, providing a lifelike representation of the leggy critters that trout eat.

The flies are fur nymphs. And they’re the perfect change up when trout are tired of your beadheads.

When trout are sick of seeing flashbacks, sparkly dubbing, gaudy colors or rubber legs, feed ‘em fur.

What’s a Fur Nymph?

It’s dubbing on a hook. And truly, nothing more is necessary. Any attempt to improve upon this simplicity . . . well, it complicates things and steals away the fur nymph’s greatest attribute.

I believe that trout are attracted to our flies for one contained element — one trigger. It could be the flash of a bead, the wiggle of rubber legs or the undulation of a soft-hackle wing. But after that initial attraction, trout are looking for reasons not to take our fly.

Photo by Bill Dell

Wild trout are primarily cautious creatures. Their selectivity is the main reason we chase them. And sure, sometimes building every trigger imaginable into one fly turns the trick. (My friend, Austin, ties a fly we call the Kitchen Sink, and it produces — sometimes.) However, most of my confidence nymphs are tied from just a few materials, so there’s less for a trout to reject on the fly.

READ: Troutbitten | Troutbitten Confidence Flies: Seventeen Nymphs

Fur nymphs take this concept of simplicity a step further.They have just one material. That’s right. — fur. It’s dubbing on a hook.

Don’t put a bead on these nymphs. Fish them with a split shot five inches in front of the fly. Fish them with a tight line or under an indy. Or use a drop shot rig and get after it that way. But trust me — they catch trout.

I’ll also mention this: If you are a dedicated euro nympher who uses beadheads for weight exclusively, you’re missing out on a very productive part of tight line nymphing — because split shot is wonderful. But you need to understand its advantages and acknowledge its limitations. You also need the right shot and a simple method for attaching and removing it. While I prefer to fish with weighted flies, sometimes split shot is the better choice. So learn to love the split shot.

READ: Troutbitten | Split Shot vs Weighted Flies
READ: Troutbitten | No Limits: Fish Every Type of Weight Available
READ: Troutbitten | Stop the Split Shot Slide

Which Ones?

My best fur nymphs are the same ones that I used twenty-five years ago: a Sowbug and a Walt’s Worm.

The shop owner at Fly Fisher’s Paradise graciously shared both flies with me. And like any fly tyer, I’ve tinkered with the dubbing blends for these flies over the decades. I’ve added ribs, wing cases and shellbacks in an effort to improve the patterns. But I keep coming back to the originals because they fish better. And if you test these on your own, without bias, you may learn the same thing.

It might be hard to have confidence in the simplicity of dubbing on a hook. We are so conditioned to see nymphs with all the adornments of beads, hot spots and colored UV resins, that putting faith in a fly without even a tail to show for itself seems improbable.

But remember, these flies are part of a system. They are the compliment — the back leaf in a fly box — to a full set of bright beads, legs and attractive elements on the other side of the box. These are the change up to a two-seam fastball.

Favorites

You can surely choose a favorite dubbing, wind it on a hook in a cigar shape and call it good. I suspect that a talented angler can make almost any fly work. But there’s a reason that the following two patterns have stood the test of time.

If you do choose to tinker, I recommend keeping the changes subtle. Perhaps go with olive rather than grey. Basically, I advise against complicating these flies. They should not be flashy or colorful. We already have enough of that in our fly boxes.

These flies are dubbing on a hook. Never forget that.

FFP Sowbug

Recipe

Comments:

I know that cress bugs have a shellback. And I admit that I carry this fly with a clear shell and a mono rib as well, with the dubbing teased out on the sides. But the truth is, I do just as well with the FFP Sowbug tied in the round — probably better. And trout take this for a lot more than just a cress bug. (More on that below.)

You might be wondering about the lack of a rib. It’s not necessary. And the addition of the rib cuts the bugginess of the dubbing to about half. Sure, you can pick it out with Velcro or a bore brush after you rib it, but you can pick it out even more without the rib.

The fly’s durability is greatly enhanced if you dub in layers. I usually go from front to back and then back to front — two thin layers of dubbing that form a thick oval shape. Whip finish, and you’re done.

Walt’s Worm

Recipe

Comments:

Oh, I know. You carry Walt’s Worms with beads and flashy ribs. So do I. In fact, I think we could probably leave the house with a small box of Walt’s variations and catch trout anywhere, anytime.

This fur nymph is Walt Young’s original (so I’m told). His recipe was Hare’s Ear Plus on a hook. I mix in 40 percent regular Hare’s Ear because I find that Hareline adds a lot more antron to the Plus dubbings than they used to, and I think it’s a little much.

Just like the FFP Sowbug, you don’t need a rib. Enough said.

Is Walt’s Worm a cranefly larva? Sure. It’s also a scud, a caddis larvae, a mayfly, stonefly and whatever else a trout wants it to be. It’s yummy and lifelike.

Trout everywhere eat the Walt’s Worm. So don’t ever forget the original pattern.

READ: Troutbitten | What’s the Deal With Hare’s Ear?

When and Where

It happens most summers. Every year, the fur nymphs seem to take over for a period of time. When the water is low and clear, when the sun is high every day, when the warming waters in other regions concentrate most anglers into the remaining cooler rivers, trout start rejecting beadheads.

Have they just seen too many beads? Yes, I think it happens.

These days, with the most popular nymphs carrying a bright metal bead, trout can eventually tire of the look. I often turn to black beads or flat painted beads, and yes, they all produce.

But remember, a fur nymph, with split shot placed five inches in front, just fishes differently than beadheads without shot. Essentially, the shot provides the nymph five inches of grace — freedom to move without the influence of direct contact to the fly. That too, is a change up. And it’s another part of the success of the fur nymphs.

History

In many eastern waters, the main hatches are finished by mid-June. And in tailwaters and limestone streams, the bulk of what a trout sees are crustaceans — cressbugs and scuds. However, even in freestone streams that produce none of these crustaceans, fur nymphs work wonders — they still turn fish on.

It’s the nondescript nature of these patterns, the movement and the simplicity that does the trick.

Remember, fur nymphs are tied with nothing that can turn a trout off. So keep them that way.

Pure and Simple

I get a kick out of fishing such natural patterns. In a way, catching trout without a flashy bead, opal tinsel or wire rib for attraction feels like a greater accomplishment.

It’s probably not. In the end, it’s our presentation that seals the deal. But it makes me chuckle a bit when I turn to the fur nymphs, and trout start eating in the same places where they were rejecting all of my first choice, beadhead flies.

Simple flies are fun to fish, because we do it without the aid of extra attraction. And a fur nymph is efficiency in form.

It’s dubbing on a hook, and trout eat it. So feed ‘em fur.

Fish hard, friends.

 

Enjoy the day.
Domenick Swentosky
T R O U T B I T T E N
domenick@troutbitten.com

 

Share This Article . . .

Since 2014 and 600 articles deep
Troutbitten is a free resource for all anglers
Your support is greatly appreciated

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

Fly Fishing Tips: #53 — Nymphing: Set On Anything Unusual

Fly Fishing Tips: #53 — Nymphing: Set On Anything Unusual

On a first drift through the lane, you may very well set on anything. But maybe that line hesitation was just the flies ticking the top of a rock. Good. Now you know.

Don’t set on anything. And don’t wait for a sixth sense to kick in and grant you the superpower of sensing trout takes. Instead, pick a lane and learn it. Use the nymph as a probe to draw a mental map of a specific lane. Refine the drift. And all the while, set on anything unusual.Let’s break it down real quick . . .

Three Styles of Dry Dropper: #1 — Bobber Dry Dropper

Three Styles of Dry Dropper: #1 — Bobber Dry Dropper

Commonly, we find trout feeding on multiple stages of a hatching insect. And we easily adapt to this behavior with multi-fly rigs. A pair of nymphs or a brace of wets covers two or three zones under the water, reaching interested trout through the water column. And when both flies are under the surface, the rigging, casting and drifting is straightforward.

But mixing fly styles — fishing both a dry fly and nymph on the same line — requires a different mindset . . .

Fly Fishing Strategies — The Tuck Cast

Fly Fishing Strategies — The Tuck Cast

The tuck cast is a fly fishing essential. It’s a fundamental component of good nymph fishing, and it’s useful on streamers and wets. Even dry flies get some necessary slack by completing the same motion of a tuck cast on a dry leader. It’s a vital fly fishing tool, not a specialized cast for rare moments. The tuck cast is an elemental part of the fly angler’s casting approach.

The tuck cast shines brightest given a tight line nymphing method. So let’s start there before branching out.

A good tuck cast forces the nymph into the water before the attached leader follows. Understand that first. This simple concept is the tuck cast. And from this idea, endless variations abound . . .

Is a soft sighter best? Not always

Is a soft sighter best? Not always

My first experience with modern sighter material was an opaque line from a Czech company. I paid more in shipping than I paid for the line, and I waited a couple weeks, wondering if the package would ever arrive.

It did. And I immediately noticed how different it was. The material was extremely limp when compared to the same diameter of the Gold Stren and Amnesia that I favored. And at the tying desk, where I’d opened the package and inspected the line, I loved how visible the new bi-color was — it was opaque, not translucent. So I was eager to fish with the new line, assuming it would become my new favorite sighter material.

It didn’t. Instead, just a few casts in, I realized what I’d given up by using the new material — turnover.

For better or worse, modern sighter material is all quite similar in design to that first line I bought from the Czechs. It’s opaque (great). And it’s limp (great only sometimes.) . . .

Tight Line Nymphing — The Check Set

Tight Line Nymphing — The Check Set

How do you know when to set the hook? Should you set on any twitch, pause or hesitation of the line and sighter? Yeah, sometimes. If the trout eats the nymph fast and hard, those twitches and pauses are unmistakable. Aggressive takes are obvious, but most eats on a nymph are subtle. And the angler has a choice: set on anything, or make guesses about every twitch, pause and hesitation. It’s a rough life. But there’s a third option too . . .

The check set is a very short and powerful hook set that moves the nymph just a few inches. Drift, drift, bump, check set. Nope, not a trout. Then let the nymph fall back into the drift and watch for the next take.

That sounds much easier than it really is. And in fact, the check set simply does not work under some conditions. But in the right situation, it’s a deadly tactic. Let’s get to that . . .

Six ways to get your fly deeper

Six ways to get your fly deeper

In time, all things in a river sink to the bottom. How much time do you have?

Here are the five elements: weight, depth adjustment, material resistance, drift length, current seams.

Each one of these elements works with the others to get deeper and to get there more naturally. It’s not enough to add some weight, just like it’s not enough to switch from 3X to 4X, or to slide the indy up the line or drop the sighter. All of it matters. And everything interacts with the other things beside it.

What if we get the weight right? What if we get the depth set, the distance factored in, and we’ve balance all of it together with the material resistance of the tippet and the flies themselves? What if we set everything up just right? What then is the X-factor?

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.

15 Comments

  1. Like you, I frequently find that changing from beachhead nymphs to ones without beads produces fish that I didn’t know where there.

    When I fish these simple flies, I frequently drop some small stuff (midge larvae, etc) behind them. Do you do that? In general, could you tell me whether you fish unweighted nymphs five inches behind a split shot alone, or with some kind of dropper?

    Reply
    • Hi Alex,

      Thanks for the questions.

      Regarding dropping midge larva behind: I don’t, but if you keep it real small, as you describe, then I see how it would work. I most often fish these fairly small anyway, with my favorite sizes 16-20, maybe 14 in the WW.

      Regarding the dropper: sometimes I use a tag dropper about 20 inches up — probably about half the time. Often it’s another fur nymph or a real small beadhead.

      Both questions kind of lead me to this point: when I turn to the fur nymphs, it’s often because I find trout being selective. And in those moments, I tend to simply the rig in other ways too — so no trailing fly and often no tag fly. Just a fur nymph at the point and a split shot 5 inches up from it.

      All that said . . . lots of stuff works and it’s fun to experiment. I’m sure you have your favorites that work just as well as mine.

      Cheers.
      Dom

      Reply
  2. This spring I experimented a lot with fur nymphs and I’ve decided I like to dropshot unweighted fur nymphs on a short tag under higher flows…i like to think my strike detection is better than with them trailing 5 inches behind a split shot, although I caught plenty that way as well.

    Reply
  3. Greg, I’m also always experimenting with a drop shot technique. When I do drop shot, I vacillate between using a sighter and using a bobber (i.e., bounce nymphing). Do you have any thoughts on these variations of the basic drop shot method?

    And Dom, I’m not sure about superior strike detection, but I do notice that I foul hook fewer fish when drop shotting. Thoughts?

    Reply
    • I was always lazy and avoided shot (usually just fished tungsten beadheads for my anchor) but decided this past winter/early spring I was going to dedicate some time to messing around with shot and avoiding the tungsten beadheads.

      I either did an unweighted squirmy 5″ behind a shot or I drop-shotted with unweighted fur nymphs on short (4″) tags above a split shot that would tick bottom. I think the trailing squirmy (or egg) behind a shot is the way to go when you need to go deep (e.g. dead of winter). I liked drop-shotting the way I did when there was more bug life and the fish were more mid-water column oriented. Also it’s nice to avoid losing flies to the bottom – I usually just lose the shot at the end of the rig which is easily replaced. Caught many fish with either approach.

      I fished both strategies with a tightline approach with 20lb chameleon w/sighter, etc. This is in small streams, short drifts, so did not spend much time trying suspending strategies. I know people drop shot very long riffles but I don’t have that kind of water where I fish. Not a pro by any means, I still need to play around with it this winter/next spring. In low water conditions (late summer/early fall) almost any “nymphing” I do is dropping a slightly weighted natural looking/small nymph/wet fly off a terrestrial dry fly.

      Reply
  4. Yep.

    Reply
  5. Thanks for sharing Dom.

    Reply
  6. My issue is I don’t tie and the local shops are happy to only offer bead head varieties. The trout I fish for have seen every one of the beadheads they stock. What is a guy to do…start tying or is there a decent source for drab patterns?

    Reply
    • Start tying… just don’t buy anything other than the material listed here or you’ll be out most of your income soon…

      Reply
    • Thanks Rick. No, that’s no kinds of conflict, but I appreciate it. Cheers. Dom

      Reply
  7. Sawyer’s Killer Bug is a 90 year old pattern that has earned space in my box.

    Reply
  8. Fished a local central Pa stream a while back and decided to try something different: drab and splitshot – did well. Never stop learning- Thanks

    Reply
  9. An unweighted nymph with split shot really is under-rated. I noticed this when my fishing partner landed several nice fish from slow pools one morning while I, equipped with beadheads in every size shape and colour, was unsuccessful. I believe in slower water pools an unweighted fly with shot is the way to go to get a natural presentation meanwhile in small riffles and pocket water I choose beads for their quick descent. Have you noticed this trend in water type when fishing flies without beads and shot?

    Reply
  10. Wow you just described my most used and successfull nymph I used as a kid and still do today. Yes I have tinkered with it to add a bead and hot spot but I still have ones with no hot spot and non beaded.
    Its such a simple fly I wonder why no one else had caught on. I guess its to simple to see in the fly shops.

    Reply

Submit a Comment

Your email address will not be published. Required fields are marked *

Recent Articles

Recent Posts

Pin It on Pinterest