Perfect from the Start

by | Jun 28, 2020 | 15 comments

Call them educated. Say they’re picky, experienced, touchy or selective. The wild trout that many of us target are efficient feeders, and they don’t buy lousy presentations of a fly.

In many regions, the rivers are so rich with bug life and baitfish that these trout have options. They eat what they want. In some places, like the spring-fed streams of limestone country, trout feed all year long, with no pause for water that’s too warm or too cold. It isn’t, so they eat whenever they want. There is no “feeding season,” because it happens 365. And when a trout can feed on what it wants, when it wants, that trout doesn’t eat poor presentations of a fly. The cast and the drift — our presentation — must be perfect.

Photo by Bill Dell

From the Start

I know experienced anglers who believe that if the fly is drifting naturally as it approaches the trout, it should be enough. But they’re wrong. It’s not enough.

A dry fly angler may cast well above a rising trout and drop the fly in the same lane at long distance. But if drag sets in quickly, the cast is useless. Can you mend to feed enough slack above the dry and set up a perfect drag-free look as it passes over the rising trout? Sure, if you’re handy with the fly rod. But selective wild trout rarely buy it. Because, before the dry settles into the drag-free drift, our trout has already seen the fly dragging far upstream. And the fly is refused before it ever gets close to the trout.

READ: Troutbitten | Fifty Fly Fishing Tips: #10 — Mend Less

I’ve met anglers who’s nymphing strategy starts with long casts, well above their target water. They believe in giving the fly time to drop through the column by casting further upstream of the trout, eventually setting up the right level and speed of drift before it reaches the fish. But this is another mistake. Because the extra line on those far-off casts causes drag, and the trout see it coming further than most of us estimate. Then, just like the dry on the surface, trout refuse the dragging nymph long before it approaches them.

These are wasted casts. And they are long moments spent drifting flies that will never be eaten.

What’s the solution?

Stick the landing.

READ: Troutbitten | Stick the Landing While Tight Lining

We must make casts that show a perfect presentation from the start. And for dry flies and nymphs, that means providing a drag free drift at the beginning.


Much of our success, in whatever we do, goes back to refining the basics. And fly fishing is no exception.

Choose shorter casts over longer ones, for the extra control. Wade as close as possible. Stay mobile and take two steps over rather than stripping off another six feet of fly line.

READ: Troutbitten | Be a Mobile Angler

And remember, perfect presentations on a dry fly are often set up in the air rather than mending line on the water.

Likewise, the best dead drifts with a nymph include a tuck cast, turning over the line and the leader to poke our flies through the surface with only the tippet that must enter. The rest stays above the water. Yes, we tuck cast, even in shallow water.

READ: Troutbitten | Fly Fishing Strategies — The Tuck Cast

Sometimes, longer drifts cannot be helped. But it’s up to us to make the presentation perfect from the beginning, or at least as soon as possible.

Photo by Trevor Smith

Never underestimate how far away a trout can see upstream. And never underestimate how far away a trout will refuse a fly. It might drift perfectly, right past the trout. But the decision — the refusal, may have already been made with the fly twenty feet upstream.

Make it perfect from the start.

Fish hard, friends.


Enjoy the day.
Domenick Swentosky


Share This Article . . .

Since 2014 and 600 articles deep
Troutbitten is a free resource for all anglers
Your support is greatly appreciated

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

New Structure | Old Structure

New Structure | Old Structure

One of my favorite places in the world is a deeply shaded valley that runs north and south between two towering mountains of mixed hardwoods. The forest floor has enough conifers mixed in to block much of the sunlight, even in the winter. The ferns of spring grow tall, and thick moss is spread throughout. The ground remains soft enough here that all large trees eventually surrender to the valley. When they can no longer support their weight in the soft spongy ground, they fall over, leaving a broken forest of deep greens and the dark-chocolate browns of wet, dead bark. It’s gorgeous.

Fallen timber also dictates the course of this cold water stream. The fresh tree falls force the creek to bend away from the hillside. Rolling water carves away the earth and lays bare the rocks — these stones of time, as Maclean puts it. And when water cuts into a neighboring channel, previously dry for centuries, new river banks are undercut and fresh roots exposed . . .

Dirty Water — Tight Targets

Dirty Water — Tight Targets

. . . If visibility is twelve inches or less, well then, things are pretty muddy.

Today, visibility was at least twice that. And I’m not saying it was clear enough for trout to make out details at two feet, but if you dunked your head under the water and looked upstream, you could probably see shapes coming from about twenty-four inches away. And if those shapes looked like food, you might be interested. Maybe not.

I have a bunch of tips for fishing this kind of water, and I’ve learned to enjoy the challenge. But all of my tips start with this . . .

That’s Not a Dead Drift

That’s Not a Dead Drift

Fly fishers talk a lot about a dead drift. And why shouldn’t we? So much of our time is spent trying to replicate this elusive presentation that the concept of drifting flies without influence from the leader dictates a large part of what we do. It’s what we think about. We plan for it, rig for it and wade into position for it.

. . . If you just twitched or stripped your fly, it cannot dead drift next. Anything under tension drifts with some influence from the leader. And that’s not a dead drift.

Eggs and Olives

Eggs and Olives

The early spring season is very much defined by the resurgence of the egg pattern. And by the time the suckers are done doing their thing, our hatch season is in full swing. Then, just like that, the egg bite turns off. Suddenly the trout favor mayfly and caddis imitations over the full-color egg options.

But as reliable as the egg bite can be in early spring, you don’t want to sleep on the Olives . . .

Tight Line Nymphing — Contact Can Be Felt at the Rod Tip

Tight Line Nymphing — Contact Can Be Felt at the Rod Tip

. . . But Smith had also drawn out of me one thing that I’d never fully put into words before explaining it to him. Namely, that contact is felt as much as it’s seen. While tight line nymphing, I’d told Smith, an advanced angler can feel contact with the nymph on the rod tip. Essentially, you could very well fish with your eyes closed. And because Smith was skeptical, I’d suggested some after-dark tight line nymphing as a way to prove to my friend that he could feel that contact just as well as anyone . . .

Tight Line Nymphing — How Much of this is Feel?

Tight Line Nymphing — How Much of this is Feel?

Smith was still puzzled, and I suspected I was about to join him. He held up his rod, with the long Mono Rig leader, two nymphs and a sighter, and pointed to it.

“But if strike detection is mostly visual, what part of this is feel?”

Smith had asked a question that I’d never fully considered. Then I answered. “At the rod tip you can feel when you’re in contact with the flies . . .”

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.


  1. I think the degree to which any individual trout refuses a fly due to long distance drag depends a lot on their mood. Happy, steady risers seem to be less sensitive to slight imperfections in presentation. In my neck of the woods, a lot of wild trout are caught by guided clients who have anything but perfect presentation skills.

    • Thanks for the thoughts, Rick.

      Happy and steady risers are a rare thing, honestly, no matter where you are. Out of a full year, that’s a small percentage of time.

      But certainly trout can be taken with less than perfect presentations. I think we agree with that, and I’ve been through it here on Troutbitten. But do you want to catch more trout, and do you want to catch tough trout in tough waters? Get things perfect from the beginning.


      • Happy, steady risers are getting scarcer than ever around hear. They are a godsend when you find one for sure. So much pressure from drift boats and anglers in general. Not to mention the return of eagles and osprey which are all over the UDR system. No one can argue against the benefit of a drag free presentation from the get go. And completely agree that aerial mending beats water mends 9almost) every time. Hey, I hope your streams have more water in them the freestones up here. Been an unusually dry June. Keep cranking out your unique takes on the sport. Cheers

        • Those big wild bows on the UDR are a lot more forgiving than the browns when it comes to a perfect drift.

    • I think that to many monorigged are caught up with long drifts. In true pocket water or highly oxygenated runs my drifts start with a tuck cast and sticking the landing. This might be a 1 to 3 second drift which covers 3 to 10 feet. Hook set at 2 to 3 o’clock and redeliver. It works

    • Ahhh! Tenkara!!

  2. Because of drag or poor presentation a trout will refuse a fly. What does the trout think the fly is or what’s wrong with the fly. I understand that it may look unnatural, but I can’t imagine that every real fly in the water looks perfect.

    • Gary Borger put it this way: Imagine you have cut up your steak into bite size pieces and while you’re eating one of the pieces suddenly crawls off your plate. Are you really going to stab it with your fork and eat it?

      • Oh what a visual that is! I’m going to use that in teaching my grandson fly fishing.

  3. Love your blog! So how far *can* a trout see upstream? Here’s my situation:

    I’ve spotted a nice fish, but the only way I can get a good drift is from directly upstream. I want to land the fly close to minimize drag and avoid having to put more slack into the system (maybe a bucket cast?). I have had a couple refusals and ended up putting the fish down.

    For next time, how far in front of it do I need to drop an emerger or dun so that it comes into its vision “naturally” versus just “appearing” on the water? Maybe I should throw a terrestrial, which is more likely to just plop in its face?

  4. Another great LESSON.

  5. An exception to your rule is French Nymphing in crystal clear slowe water – still with no fly line on the water for drag but longer presentation drifts while avoiding being seen by Mr. Trout.

  6. I’m just leaving one comment, and technically it’s not even mine.

    ‘Perfection is not attainable, but if we chase perfection we can catch excellence’ V Lombardi.

  7. Mending right after casting to get a drag free drift is critical for dries. It’s hard to do right and not pull the fly a bit so most people dont do it. If you can master it you will have good drifts right from the start. Pros can do all of the fly line and have the mend stop at the leader with no motion of the fly. Most of us (me included) end up figuring out how to cast some slack in the right spot to avoid mending.

    When the action is slow i spend my time looking for tough situations and figuring out how to mend well to get the drag free drift for when the hatch is on. after many years i am still terrible at it.

    • Hi Mauro,

      Honestly, I’d say the “pros,” as you put it, know how to cast with slack and be accurate before the line hits the water. I think that’s a greater challenge than mending.

      I agree with you that a good mend is also hard to do.

      But I’m a big advocate for mending less, almost always.

      This article explains my thoughts more:



Submit a Comment

Your email address will not be published.

Recent Articles

Recent Posts

Pin It on Pinterest