Perfect from the Start

by | Jun 28, 2020 | 15 comments

Call them educated. Say they’re picky, experienced, touchy or selective. The wild trout that many of us target are efficient feeders, and they don’t buy lousy presentations of a fly.

In many regions, the rivers are so rich with bug life and baitfish that these trout have options. They eat what they want. In some places, like the spring-fed streams of limestone country, trout feed all year long, with no pause for water that’s too warm or too cold. It isn’t, so they eat whenever they want. There is no “feeding season,” because it happens 365. And when a trout can feed on what it wants, when it wants, that trout doesn’t eat poor presentations of a fly. The cast and the drift — our presentation — must be perfect.

Photo by Bill Dell

From the Start

I know experienced anglers who believe that if the fly is drifting naturally as it approaches the trout, it should be enough. But they’re wrong. It’s not enough.

A dry fly angler may cast well above a rising trout and drop the fly in the same lane at long distance. But if drag sets in quickly, the cast is useless. Can you mend to feed enough slack above the dry and set up a perfect drag-free look as it passes over the rising trout? Sure, if you’re handy with the fly rod. But selective wild trout rarely buy it. Because, before the dry settles into the drag-free drift, our trout has already seen the fly dragging far upstream. And the fly is refused before it ever gets close to the trout.

READ: Troutbitten | Fifty Fly Fishing Tips: #10 — Mend Less

I’ve met anglers who’s nymphing strategy starts with long casts, well above their target water. They believe in giving the fly time to drop through the column by casting further upstream of the trout, eventually setting up the right level and speed of drift before it reaches the fish. But this is another mistake. Because the extra line on those far-off casts causes drag, and the trout see it coming further than most of us estimate. Then, just like the dry on the surface, trout refuse the dragging nymph long before it approaches them.

These are wasted casts. And they are long moments spent drifting flies that will never be eaten.

What’s the solution?

Stick the landing.

READ: Troutbitten | Stick the Landing While Tight Lining

We must make casts that show a perfect presentation from the start. And for dry flies and nymphs, that means providing a drag free drift at the beginning.

How?

Much of our success, in whatever we do, goes back to refining the basics. And fly fishing is no exception.

Choose shorter casts over longer ones, for the extra control. Wade as close as possible. Stay mobile and take two steps over rather than stripping off another six feet of fly line.

READ: Troutbitten | Be a Mobile Angler

And remember, perfect presentations on a dry fly are often set up in the air rather than mending line on the water.

Likewise, the best dead drifts with a nymph include a tuck cast, turning over the line and the leader to poke our flies through the surface with only the tippet that must enter. The rest stays above the water. Yes, we tuck cast, even in shallow water.

READ: Troutbitten | Fly Fishing Strategies — The Tuck Cast

Sometimes, longer drifts cannot be helped. But it’s up to us to make the presentation perfect from the beginning, or at least as soon as possible.

Photo by Trevor Smith

Never underestimate how far away a trout can see upstream. And never underestimate how far away a trout will refuse a fly. It might drift perfectly, right past the trout. But the decision — the refusal, may have already been made with the fly twenty feet upstream.

Make it perfect from the start.

Fish hard, friends.

 

Enjoy the day.
Domenick Swentosky
T R O U T B I T T E N
domenick@troutbitten.com

 

Share This Article . . .

Since 2014 and 600 articles deep
Troutbitten is a free resource for all anglers
Your support is greatly appreciated

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

Tips for Better Wading and More Trout

Tips for Better Wading and More Trout

Good fly fishing requires great footwork along the way. Staying mobile, reading the water, body positioning, wading not walking, and gear preparation. These are the keys to better wading . . .

Habits: Keep It On the Reel

Habits: Keep It On the Reel

Bad habits start easily enough, but they’re ingrained when an angler chooses not to make a change, instead staying with what is comfortable and convenient. We all do this at times. Instead of learning a better way, we do what is easier. In fishing, that happens a lot.

All line and leader not being used should be on the reel. Always. Yes, always, as in ALL the time.

Here’s how, why and what problems arise from doing it any other way . . .

What water type? Where are they eating?

What water type? Where are they eating?

Fast, heavy, deep runs have always been my favorite water type to fish. I can spend a full day in the big stuff. I love the mind-clearing washout of whitewater. No average sounds penetrate it. And the never ending roar of a chunky run is mesmerizing. I also enjoy the wading challenge. The heaviest water requires not just effort, but a constant focus and a planned path to keep you upright and on two feet. Constant adjustment is needed to stay balanced, and one slip or misstep ends up in a thorough dunking. It reminds me of the scaffold work I did on construction crews in my twenties. I always enjoyed being a few stories up, because the workday flew by. When every movement means life or death, you’d better stay focused. I always liked that . . .

Why do we miss trout on a nymph?

Why do we miss trout on a nymph?

Late hook sets are a problem, as is guessing about whether we should set the hook in the first place. But I believe, more times than not, when we miss a trout, the fish actually misses the fly. However, that doesn’t let us off the hook either. It’s probably still our fault. And here’s why . . .

Loss of contact, refusals and bad drifts. All of these things and more add into missing trout on nymphs. So how do we improve the hookup ratio?

Fishing Light

Fishing Light

You’ve probably been wading upstream on a favorite trout stream and seen another angler’s lost tackle. Maybe the whole mess was in the streamside trees, with split shot and bobber attached, or a misguided F13 Rapala with rusted hooks. Maybe you’ve snagged a pile of monofilament stuck in waterlogged branches and lodged against a rock. And when you’ve seen all that mess, maybe you were stunned by how heavy the tackle was. Are you with me? . . .

Nobody Home | Nobody Hungry

Nobody Home | Nobody Hungry

Nobody home means there’s no trout in the slot you were fishing. And sometimes that’s true. Nobody hungry suggests that a trout might be in the slot but he either isn’t eating, isn’t buying what you’re selling, or he doesn’t like the way you are selling it.

Does it matter? It sure does!

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.

15 Comments

  1. I think the degree to which any individual trout refuses a fly due to long distance drag depends a lot on their mood. Happy, steady risers seem to be less sensitive to slight imperfections in presentation. In my neck of the woods, a lot of wild trout are caught by guided clients who have anything but perfect presentation skills.

    Reply
    • Thanks for the thoughts, Rick.

      Happy and steady risers are a rare thing, honestly, no matter where you are. Out of a full year, that’s a small percentage of time.

      But certainly trout can be taken with less than perfect presentations. I think we agree with that, and I’ve been through it here on Troutbitten. But do you want to catch more trout, and do you want to catch tough trout in tough waters? Get things perfect from the beginning.

      Cheers.
      Dom

      Reply
      • Happy, steady risers are getting scarcer than ever around hear. They are a godsend when you find one for sure. So much pressure from drift boats and anglers in general. Not to mention the return of eagles and osprey which are all over the UDR system. No one can argue against the benefit of a drag free presentation from the get go. And completely agree that aerial mending beats water mends 9almost) every time. Hey, I hope your streams have more water in them the freestones up here. Been an unusually dry June. Keep cranking out your unique takes on the sport. Cheers

        Reply
        • Those big wild bows on the UDR are a lot more forgiving than the browns when it comes to a perfect drift.

          Reply
    • I think that to many monorigged are caught up with long drifts. In true pocket water or highly oxygenated runs my drifts start with a tuck cast and sticking the landing. This might be a 1 to 3 second drift which covers 3 to 10 feet. Hook set at 2 to 3 o’clock and redeliver. It works

      Reply
    • Ahhh! Tenkara!!

      Reply
  2. Because of drag or poor presentation a trout will refuse a fly. What does the trout think the fly is or what’s wrong with the fly. I understand that it may look unnatural, but I can’t imagine that every real fly in the water looks perfect.

    Reply
    • Gary Borger put it this way: Imagine you have cut up your steak into bite size pieces and while you’re eating one of the pieces suddenly crawls off your plate. Are you really going to stab it with your fork and eat it?

      Reply
      • Oh what a visual that is! I’m going to use that in teaching my grandson fly fishing.

        Reply
  3. Love your blog! So how far *can* a trout see upstream? Here’s my situation:

    I’ve spotted a nice fish, but the only way I can get a good drift is from directly upstream. I want to land the fly close to minimize drag and avoid having to put more slack into the system (maybe a bucket cast?). I have had a couple refusals and ended up putting the fish down.

    For next time, how far in front of it do I need to drop an emerger or dun so that it comes into its vision “naturally” versus just “appearing” on the water? Maybe I should throw a terrestrial, which is more likely to just plop in its face?

    Reply
  4. Another great LESSON.

    Reply
  5. An exception to your rule is French Nymphing in crystal clear slowe water – still with no fly line on the water for drag but longer presentation drifts while avoiding being seen by Mr. Trout.

    Reply
  6. I’m just leaving one comment, and technically it’s not even mine.

    ‘Perfection is not attainable, but if we chase perfection we can catch excellence’ V Lombardi.

    Reply
  7. Mending right after casting to get a drag free drift is critical for dries. It’s hard to do right and not pull the fly a bit so most people dont do it. If you can master it you will have good drifts right from the start. Pros can do all of the fly line and have the mend stop at the leader with no motion of the fly. Most of us (me included) end up figuring out how to cast some slack in the right spot to avoid mending.

    When the action is slow i spend my time looking for tough situations and figuring out how to mend well to get the drag free drift for when the hatch is on. after many years i am still terrible at it.

    Reply
    • Hi Mauro,

      Honestly, I’d say the “pros,” as you put it, know how to cast with slack and be accurate before the line hits the water. I think that’s a greater challenge than mending.

      I agree with you that a good mend is also hard to do.

      But I’m a big advocate for mending less, almost always.

      This article explains my thoughts more:

      https://troutbitten.com/2017/10/01/fifty-fly-fishing-tips-10-mend-less/

      Cheers.
      Dom

      Reply

Submit a Comment

Your email address will not be published. Required fields are marked *

Recent Articles

Recent Posts

Pin It on Pinterest