Streamer Presentations — The Cross-Current Strip

by | May 3, 2020 | 9 comments

There are a lot of ways to retrieve a long fly after the cast. And that’s really what’s so much fun about the streamer game. Fly anglers might spend hours fretting over the imperfection of a drag free drift on a dry fly or twice as long considering the depth and drift of a nymph, but when the streamer is tied on, it’s a chance to let loose. Nothing else in fly fishing allows for such freedom of presentation. “Everything works sometimes.” No other fly type fits that tenant so well.

I fish streamers a lot. Not because I catch the biggest trout with them — sometimes I do. And not because I catch the most trout with them — that’s for certain. I fish streamers because slinging big bait is fun. Because by simply tying on a streamer, a hundred different variations of retrieves, strips, jigs and jerks are immediately a good option. I like that.

So after I make the streamside switch from smaller stuff to a long fly, I start covering more water and cycling through my favorite retrieves, just trying to find that good streamer bite. On the best days, I locate a look that the trout respond to, and I work the river trying to refine it, all while hitting each new target with a few precision casts.

And on many days — most perhaps — what trout respond to most is a cross-current strip.

I Was Just Lookin’

Notice, I said “respond to.” That’s different than an actual eat. An eat is when a trout munches down on the fly. He actually eats it, or at least tries to. The streamer game is full of half-hearted flashes and drive-bys, of chases and heart stopping t-bones. These are the moments when we are ready to set the hook and stick it to the fish. Maybe we try to, and the trout turns away as if to say, “Nah, I was just lookin’ at it.”

READ: Troutbitten | Streamer Presentations — Why “Always Strips Set!” is a Fallacy

Most streamer anglers are okay with some of that. It’s the cost of doing business. And watching a quick ambush or a violent hit on the fly is a heart-stopping moment with a reward in itself.

Point being, the cross-current strip gets more refusals than some of my other favorite streamer presentations. I hook up more with a slow slide, a good deep jig, a speed lead and all the crossover stuff. But I see more trout with a cross-current strip — even when I keep the fly down.

I also hook enough trout on the cross-current strip to make it one of my favorite retrieves. I do it a lot.

READ: Troutbitten | Streamer Presentations — The Crossover Technique

Brett in the flow

Come Across — Don’t Swing

I think a lot about the head angle while streamer fishing. And for the cross-current strip, I cast across or slightly up and across. I then gain contact and control over the fly and begin moving it across the current. Basic stuff, right? This one isn’t complicated.

Many of my favorite streamer retrieves have the head of the fly facing downstream and across. Not this one. The cross-current strip is just what it sounds like — the direction of the streamer is across the river. So a long cast and retrieve shows the fly to a lot of trout that are tucked away in their various holding areas. Therein lies part of the success.

Strip only, or combine it with alternating twitches and jerks of the rod tip. Use whatever it takes to keep the head of the fly coming across current. Often that means tracking with the rod tip downstream. Don’t allow the head of the fly to face upstream. (Don’t swing the fly.) Keep it coming across or slightly down and across all the way to the end of the retrieve.

This is easy to control with a tight line, contact system (I fish streamers on a Mono Rig a lot). But the same can be accomplished by manipulating fly line and standard leaders. That’s streamer fishing, really. Put the line and leader where you want the head of the fly to go. It’s the key principle to learn and understand.

For the cross-current strip, keep the fly broadside to the trout, the majority of which have their noses faced upstream. This way, the trout see the side of the streamer — the full profile. It’s the same thing you see when you look at the fly in your hand or at the vise. Not many presentations show such a striking broadside look to the trout, and I suspect that’s another key to the cross-current success.

Attacks from the Corners

Yesterday morning, I slung on my rain gear and hit the water in a driving rain that was quickly filling the river. I noticed the roadside drainage ditch on the drive down the hill to my local stream. It was full of water but not yet full of color. And that was my first sign that I might be hitting things at just the right time.

I love fishing a river on the rise, right before too much color takes over. And yesterday I had great fishing for a short while.

I tried bankside retrieves at first, slow stuff, with twitches and jigs mixed with small strips and the head of the fly mostly faced downstream. I dangled the fly in a few pockets next to logs and I caught a couple trout.

But when I started throwing casts further, and I stripped across current, trout darted out of every dark corner for the next thirty minutes. One after another, trout zoomed from their cover to attack the streamer. About half of them ate it, and the others turned away. I worked the water ahead of me, all by myself in the pouring rain and dark grey skies.

The action was so good, I drove up the hill to encourage my two sons to join me. They agreed. But by the time we got back to the water, the river had turned color and the streamer bite was over. Nothing lasts forever.

Photo by Josh Darling

Always keep the cross-current strip in your lineup.

Fish hard, friends.

READ MORE : Troutbitten | Category | Streamers

 

Enjoy the day.
Domenick Swentosky
T R O U T B I T T E N
domenick@troutbitten.com

 

Share This Article . . .

Since 2014 and 600 articles deep
Troutbitten is a free resource for all anglers
Your support is greatly appreciated

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

You Already Fished That

You Already Fished That

If you’re committed to working a section of river, then once you’ve done your job in one lane, trust what the trout tell you. Don’t re-fish it, and don’t let the next cast drift down into the same spot again either. Sure the water looks good, and that’s why you fished it in the first place. But you’ve already covered it. So let it go, and focus on the next target. Trust the next opportunity . . .

Natural vs Attractive Presentations

Natural vs Attractive Presentations

. . . Let’s call it natural if the fly is doing something the trout are used to seeing. If the fly looks like what a trout watches day after day and hour after hour — if the fly is doing something expected — that’s a natural presentation.

By contrast, let’s call it attractive if the fly deviates from the expected norm. Like any other animal in the wild, trout know their environment. They understand what the aquatic insects and the baitfish around them are capable of. They know the habits of mayflies and midges, of caddis, stones, black nosed dace and sculpins. And just as an eagle realizes that a woodland rabbit will never fly, a trout knows that a sculpin cannot hover near the top of the water column with its nose into heavy current . . .

How To Be A More Accurate Fly Caster

How To Be A More Accurate Fly Caster

Only a small percentage of anglers have the necessary accuracy to tackle the tough situations. And big trout seem to know where to hide from average anglers.

In fact, accuracy is the most important skill an angler can learn. The simple ability to throw a fly in exactly the same place, over and over, with subtle, nuanced differences in the tippet each time, is the most valuable skill for any fisherman . . .

Trout Like To Line Up In Productive Seams

Trout Like To Line Up In Productive Seams

Trust the lanes. Trout choose them for a reason. And while it might not make sense to us why they pick one lane over the next, don’t argue with the fish. Wherever you fool a trout, expect to catch his friends in the very same lane. Follow that seam all the way to its beginnings, even if the character of that seam changes from deep to shallow or from slow to fast. Stay in the lane, and trust that more hungry trout are there, waiting to be fooled . . .

Reading Water — Every Rock Creates Five Seams

Reading Water — Every Rock Creates Five Seams

Downstream of every rock are three obvious seams: the left seam, right seam and the slower seam in the middle. That part is easy. But the most productive seams are more hidden, and many anglers seem to miss them altogether. These are the two merger seams, where each fast seam meets the slower part in the middle. And if I had to pick just one target area, day after day and season after season, I would surely choose the merger seams . . .

The Tight Line Advantage Across Fly Fishing Styles

The Tight Line Advantage Across Fly Fishing Styles

I first picked up fly fishing as a teenager, and I vividly remember the confusion. With time, I learned to cast the weight of the line rather than the weight of the lure, but I didn’t know what to do with the line after the cast. Sure, I learned about mending, but that never seemed to solve the problems at hand. Enter, tight lining concepts . . .

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.

9 Comments

  1. Hi Nick! Just curious…..what streamers do you use the most?

    Reply
  2. Thanks for these articles, especially during this time. Helps me keep positive and looking forward to trying the techniques on the water. Stay well.

    Reply
    • Hi Mike,

      Right on. And if possible, I encourage you to go fishing right now. Don’t wait. Nothing to fear on the river.

      Cheers.
      Dom

      Reply
  3. Do you generally work your way upstream or downstream when fishing streamers ?

    Reply
    • Hi Henry.

      I honestly can’t give you a general answer there. While I always nymph upstream, and usually fish dries upstream, I fish streamers both ways.

      BUT . . . when I want to cover a lot of water on a big river, I work downstream while I still cast UPstream and across.

      Make sense?

      Dom

      Reply
  4. Hi Dom,

    Thank you for all of your articulately presented advice!

    I have two questions.

    I have it stuck in my head that streamers are better on cloudy days or in shade. Is that the case? Is there any reason to fish them on sun-drenched stream?

    Also,if a cast plops a streamer into the water, is the plop less likely to spook trout if the plop occurs right next to the bank where fish are possibly used to things falling into the stream?

    Best,

    Reply
    • Hi Charlie.

      Thanks for reading.

      I do like them on cloudy days much better. Streamers in the sun is rarely productive for me. But is does happen. Here’s one memorable day where it did:

      https://troutbitten.com/2015/05/12/aidens-first-brown-trout/

      Regarding that plop: I find trout to be attracted to a plop just as often as they are spooked from it. It’s all conditional, really. But yeah, when they are against the banks they seem to be ready and waiting for it. Good call.

      Cheers.
      Dom

      Reply
  5. Dom:
    This is a great website. I look forward to reading it, well written and with an educational flair. Similar to Kelly Gallup. “Hope that helped you out”.
    Keep it up.
    Thanks,
    Tom

    Reply

Submit a Comment

Your email address will not be published. Required fields are marked *

Recent Articles

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

Pin It on Pinterest