The Sweet Ride

by | Dec 18, 2019 | 9 comments

There’s a sweet spot to every drift. For each swing of a wet fly, strip of a streamer or drift of a dry, there’s a range — a distance — where the fly looks its best. This is the moment where the fur and feathers tied to a hook are most convincing or most natural. It’s when the fly is really fishing and not just dragging through the water. Good anglers recognize this sweet spot of the drift. They maximize its length. They position themselves in the river to control it with their rod tip or with slack line. And they set it all up to happen over the best trout in the river.

First, there’s the cast and delivery. Our line hits the water, and it may take a moment to gain contact with a nymph, to get the streamer to depth or provide extra slack to a dry. Then the drift, the strip or the swing begins, and we try to recognize the part of the ride that is just right. We attempt to lengthen that inherently short time. And at our best, we take this perfect look to the juiciest gut in the run.

All of this is variable. Sometimes it’s eight feet of a perfect dead drift with a BWO Klinkhammer in a gently rippling seam. Other times it’s the head-flip-and-drift after a deliberate lane change while working streamers on a crossover technique. Or maybe it’s a five foot glide with a nymph through the strike zone before pulling it out at the lip. We’re looking for the best part of what happens after a cast. We’re searching for the sweet ride. And we’re trying to make it last as long as possible.

READ: Troutbitten | Get Short and Effective Drifts with Your Fly

At First

The first few casts in a specific lane are exploratory missions. And if you get much of a good ride on the first cast you’re either very lucky or a master at reading currents. But it’s certainly easier to nail it the first time with a dry fly, and it’s probably hardest with a nymph.

Because we can see the surface currents and watch their effects on our fly, casting dries and finding the sweet ride up top is all visual. We want the dry to land with enough slack to drift drag free instantly. Most of a good surface ride starts when the dry touches, so the experienced angler places the fly upstream of the trout and in the same current seam. Good dry fly anglers get long, sweet rides.

READ: Troutbitten | Category | Dry Fly Fishing

Under the surface, good fishing starts with contact and control. And after the cast with a streamer, wet or nymph, it might take a moment to gain that contact, to get the right depth and set the fly on its intended course. So the fly isn’t really fishing at first. Not until we reach the strike zone or strip the streamer off the bank are we on course toward the sweet ride below.

Get Over It

Once the best part of the drift is through, when the sweet ride is over, the angler then chooses to extend it further or pick up the line and cast again. I’m strongly in the camp of pulling it as soon as the best part of the drift is finished. And I believe by giving up on the back half of drifts and swings I maximize my productive fishing time, catching a lot more trout in a day.

Look at it this way . . .

Every good dry fly angler that I fish with picks up the fly when it starts to drag. They backcast once, shoot the line forward and put the fly back on the water. Skillfully, they provide enough slack to the dry fly on the cast. They get a few seconds of a sweet ride and take the fly back off the water as soon as drag sets in again. I see no successful anglers extending dry fly drifts beyond the point where drag sets in. Not around here, and not over picky wild trout.

READ: Troutbitten | Fly Fishing Tips #10 Mend Less

On the other hand, I see most subsurface anglers trying for much longer drifts than they should. Truth is, there’s a limited range for the sweet ride underneath — just like up top. If you learn to read the water, watch your sighter and control your fly line, you can easily recognize a good drift or the best part of the retrieve. So, once that’s through, give up on it. When the sweet ride stops — get off. Set the hook, backcast once, and shoot the fly forward again.

Fish hard, friends.

 

Enjoy the day.
Domenick Swentosky
T R O U T B I T T E N
domenick@troutbitten.com

 

Share This Article . . .

Since 2014 and 700+ articles deep
Troutbitten is a free resource for all anglers.
Your support is greatly appreciated.

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

Quick Tips — Put More Juice in the Cast

Quick Tips — Put More Juice in the Cast

Keep it tight and crisp. Cast with speed. Be more aggressive. Build more momentum with the rod tip. The casting stroke should be snappy, energetic and sharp with abrupt and forceful stops between two points. I’ve used all of these descriptions and more to communicate the correction for the most troublesome fly fishing flaw out there — lazy casting.

Rods are made to cast. They are full of stored energy just waiting to be sent in motion. Put more juice in the cast. Use more power. Make the fly rod flex, and you’ll gain control, distance and precision in the presentation. I promise . . .

Quick Tips — Thumb on Top | Finger on Top

Quick Tips — Thumb on Top | Finger on Top

There’s a reason for everything, right? It’s a truism of life. And that goes double for your fly fishing game. Most of us will never get the hours we really need to learn everything we’d like about the river. Trout fishing runs deep. Questions we ask of ourselves on the walk back after dark linger in our minds until the next time we hit the stream. Until then, we research — we read, watch and talk about trout on a fly rod, filling in the hours, days and weeks until our boots are wet again.

Sometimes, things like these quick tips might answer that nagging question in your mind. Other times, one of these tips might create a new question to chew on. Both are significant. Both are valuable.

When we hold the fly rod, should the thumb or the forefinger be on top?

I use both. There are good reasons for each hold, so let’s get to that . . .

Quick Tips: Fish what you can, and leave the rest

Quick Tips: Fish what you can, and leave the rest

We’re in an extended high water period in Central Pennsylvania. Honestly, I love it. When the creek are full the trout are happy, and so am I. I’ve heard the lament of so many anglers across the region about unfishable conditions and poor results. But that’s not the reality I’m in. And if the water clarity is decent — if the trout can see the flies — I’ll take high water over low water every time. Success in such conditions just takes some discipline to fish what you can, and leave the rest.

Sure, blown out water is a bust, and there’s really not much you can do about that. But I’m not talking about muddy water and flood conditions. So far this fall season, we’ve averaged flows that are two or three times the norm for this time of year. But consider that our fall water is usually pretty low, and you might suddenly become thankful for the opportunity to fish a creek with some decent water coming through.

No matter the river or the flows, good fishing happens by staying within your effective reach. Fish within your means. If you are only comfortable in water that’s knee-deep, then find water below your knees and fish only what you can reach from there. Try hard not to fall into the grass-is-greener-on-the-other side trap.

You Need a Good Trigger Finger

You Need a Good Trigger Finger

Fly casting has a lot of moving parts. Two sets each of arms, wrists, hands and fingers all work together to flex the rod and propel the line and flies to the target. There’s a lot going on. It can feel overwhelming — like sitting behind a full drum kit for the first time and realizing that all four limbs have a responsibility to do independent things.

In fly fishing, the trigger finger has one basic but very important job. All movement of the line should come through the trigger finger . . .

Quick Tips — When to Fish Just One Nymph

Quick Tips — When to Fish Just One Nymph

John and I always keep count. He’s the only fishing friend who can pull me into such a race. And I’m not sure why.

Like all fishermen do at some point, I used to keep count of my catch. I even roughly calculated my catch rate at the end of the day, like this:

“Let’s see, I fished for five hours, but I took a twenty minute break around lunch. Walk in time was fifteen minutes, so subtract that too. I caught twenty-six trout, but I COULD have caught those couple of trout that came unbuttoned if I was more careful, so let’s add those in and say thirty. Multiply, divide and there’s my catch rate.”

That sounds like fishermen’s math, right?

But I don’t count much anymore. And I don’t like to compete against anything but the river and the trout. I don’t mind losing to the river on occasion, either. Because loss is a wonderful teacher.

But John baits me back into counting every time we fish together. And there’s no fuzzy catch-rate-math involved — just straight up fish counting.

Quick Tips — Set the hook at the end of every drift

Quick Tips — Set the hook at the end of every drift

I watched the line, waiting for some indication of a strike and intently expecting a fish to eat the nymph. Then at the end of the drift I looked away, scanning for my next target upstream. When I lifted the line for the backcast, I was surprised to find a trout on the line. He bounced off quickly because I never got a good hookset.

That’s happened to you a hundred times too, right?

Nymphing is an art of the unseen, and no matter the material attachments we add to the line for visual aid of a strike, trout take our flies without us knowing about it — probably way more often than we can imagine.

That’s why it’s best to end every underwater drift with a hook set. Do this with nymphs and with streamers, at the end of every dead drift presentation, and you’ll find unexpected trout attached to your line. The short set also prepares the line and leader for your next backcast. Here’s how . . .

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.

9 Comments

  1. This was the most valuable thing you taught me when you guided me on Penns. I still believe there are some windows where the extended drift works quite well, like in a caddis hatch. Yesterday getting off at the right stop was key.

    Reply
    • Right on. Time and place for everything. But most often, getting off at the right stop . . . I like that.

      Cheers.
      Dom

      Reply
  2. What % of your overall nymph takes occur during sweet part of your drifts? Just curious.

    Reply
    • Oh man, maybe . . . 75 percent?? But I think I’m pretty good at lining things up to make it happen too. And you have to remember, as I wrote above, that as soon as the sweet ride is over, I’m out of there. That’s usually my approach, anyway.

      Make sense?

      Cool question.

      Dom

      Reply
  3. I think one of the big advantages of tight line nymphing is you are fishing off the end of your rod most of the time thus your drifts are shorter by nature. When we indicator fish we have the tendency to start fishing 10 or so feet in front of us and unless the current is extremely consistent your control of the drift gets away from you much easier and you watch the bobber while your flies are doing whatever, hoping for a miracle. 🙂 good article Dom!

    Reply
    • I get what you are saying, and I agree that most people fish indys that way. But I’m always trying to get anglers to fish indys with tight line principles. Like this, really:

      https://troutbitten.com/2017/02/14/tight-line-nymphing-with-an-indicator-a-mono-rig-variant/

      In that way, I may not fish any further away from me. The drifts may be no longer than when I’m straight tight lining. And I am NOT out of contact with the nymph at all. Instead, I’m still in good contact with the nymph, and I’m aware of its position. There is no hoping. But the big advantage is that I can let the indy do the job of leading down one current seam.

      Dom

      Reply
      • Another great article, Dom. I also think that the article about nymphing with an indicator is one of the most astute observations on nymphing that I’ve ever seen. I was wondering if these days your preference is still for a sighter over a suspender. I realize that it depends on water type, but I mean do you tend to use one over the other as a default in average kinds of runs?
        Alex

        Reply
  4. I’m definitely guilty of extending my nymph drift to far downstream of my position. The smaller trout, mostly bows hit sometimes downstream from me. Caught one 20”bow on the East Branch Delaware this summer on the dangle while lighting up a smoke. Ha. But all the other large trout were caught across or upstream of me.

    Reply
    • Good point Dom I should have made it clear I wasn’t talking about tight line indicator fishing that you have described I was talking about what most people do when they put on an indicator. In terms of catching fish on the D on the dangle if I’ve seen it once I’ve seen it a thousand times. I took a guy there once for his first time (not the best newbie river) and I saw him working on a tangle in his fly line with his indicator 20 ft. below. when he got the knot out and reeled in he had his first D fish. Like swinging wet flies only different. 🙂

      Reply

Submit a Comment

Your email address will not be published. Required fields are marked *

Recent Articles

Recent Posts

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

Pin It on Pinterest