Everything that touches the river drags — Everything underneath drags even more

by | Oct 15, 2019 | 6 comments

This one is simple. Line, leader or tippet laying on the water drags. It’s a plain truth staring right back at us. Meaning, it’s pretty easy to see the results of drag on the water’s surface. It’s harder to see drag happening under the water and out of sight, but once you’ve put in a few thousand river hours, intuition mixes with experience, and the subtle visual signals above the river reveal the same telltale drag.

What’s the trouble with drag? It kills dead drifts. And most of what we do with dry flies and nymphs out there is predicated on allowing the fly to drift as free from the influence of our leader as possible. If it wasn’t for the damn tippet attached to the fly, dead drifts would be a whole lot easier. Amiright?

So we go through all the contortions of mending: stack mends, reach mends and aerial mends, trying to put some extra line and tippet upstream, or just laying it somewhere that it won’t tug the fly off course and out of position. But our best mending efforts result in mediocre results that lend the fly just enough slack to appear natural, if only for a moment, and perhaps long enough to fool a trout. Even the dumb ones know exactly what real flies drifting in one seam look like, so nothing is more important than a dead drift.

READ: Troutbitten | See the Dead Drift

READ: Troutbitten | Good drifts are about the leader — not the fly

Mending is rarely the best solution. Often, the better bet is to keep extra line off the water altogether. By holding line in the air we have more control over it. Sure, at longer distances, even a long and thin leader in the air can sag and cause more unwanted drag, but that’s just more motivation to fish closer. (Fish as close as possible. Always.)

So, keeping line and leader off the water is a great strategy with a dry fly. Only the line that must touch should touch. Nothing else.

And the same holds true while nymphing. Only the line that has to touch the surface should be wet. Even more importantly, only the line that must go under the surface should disappear.

 

Joey

How deep is the piece of water in front of you, and where are the trout? Alright, two feet deep. Let’s say you’re rigged with five feet of tippet beyond the sighter. Now factor in the angle of drift, and you might need three-and-a-half feet under the water — four feet at most if your drift angle leans horizontal. Most of us aren’t out there thinking in feet and inches all the time. But if the action is off, ask yourself this: Do I need to put all that tippet under the water? You probably don’t. Everything under the water drags, so limit the line underneath to only what is necessary.

Last point: When you make the delivery on a tight line rig, are you laying leader down on the water and then picking it up? If so, stop it! Anything that touches the surface, drags. So don’t lay that leader down. Keep the sighter up, along with all the tippet that isn’t necessary for getting into the strike zone. All of it stays in the air.

Everything that touches, drags. And everything that disappears underneath the surface drags even more. Never forget that. Develop your strategy around this knowledge. Refine your approach with this in mind. Keep extra leader and tippet up in the air. Keep it dry. And real drag free drifts will come much more naturally.

Fish hard, friends.

 

Enjoy the day
Domenick Swentosky
T R O U T B I T T E N
domenick@troutbitten.com

 

Share This Article . . .

Since 2014 and 600 articles deep
Troutbitten is a free resource for all anglers
Your support is greatly appreciated

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

Are You Spooking Trout?

Are You Spooking Trout?

All trout continuously adapt to their surroundings — they learn what to expect, and they spook from the unexpected.

So, stealth on the water and understanding what spooks a trout is foundational knowledge in fly fishing. Trout are easily scared. Are you spooking fish?

Why Are Summer Trout Harder to Catch?

Why Are Summer Trout Harder to Catch?

Many anglers hang up the fly rod when the days grow long. As spring surrenders its sweetheart days, summer signals the conclusion of trout fishing season, and new interests take over. The streams are fished out, the water is too warm and trout are off the feed. It’s not worth the effort, they say. Summer water surely presents a challenge. But good trout fishing can be had all summer long by accepting the difficulties and understanding the roots of the problems faced . . .

Fly Shop Fluorocarbon too expensive? Try InvizX

Fly Shop Fluorocarbon too expensive? Try InvizX

Seaguar Invizx has become my go to fluorocarbon tippet material, and some of my Troutbitten friends do the same. It’s thin, strong and flexible with excellent handling and flex. Invizx is as good as some fly shop brands and better than many others. And because the type of tippet we use is not what catches trout, I don’t overspend on tippet . . .

Dry Fly Fishing — The Forehand and Backhand Curve

Dry Fly Fishing — The Forehand and Backhand Curve

Learning to use the natural curve that’s present in every cast produces better drag free drifts than does a straight line.

It takes proficiency on both the forehand and backhand.

I’ve seen some anglers resist casting backhand, just because it’s uncomfortable at first. But, by avoiding the backhand, half of the delivery options are gone. So, open up the angles, understand the natural curve and get better drag free drifts on the dry fly . . .

Stabilize the Fly Rod with the Forearm

Stabilize the Fly Rod with the Forearm

A steady and balanced sighter is important from the beginning, because effective tight line drifts are short. But there’s one overlooked way to stabilize the sighter immediately — tuck the rod butt into the forearm.

Here’s how and why . . .

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.

6 Comments

  1. Great points, Dom. I’d like to add that even without any leader/tippet, most of the nymphs we use wouldn’t dead drift. The difference in weight between a typical beadhead, for example, and a natural nymph, is tremendous. If you drop a beadhead into a stream, it will likely just fall to the bottom and stay there (unless there’s a lot of current). So, I think that the downstream drag from a tightlined leader (and/or a bobber), actually helps to compensate for the weight of the nymph and simulate a natural drift. The problem is the very difficult juggling act between too little and too much drag. That is, I suspect, what separates the good nymph fishermen from the great ones.
    Alex

    Reply
    • Right on. What we do with the tippet connected to the fly is more important than what we do with the fly.

      Great stuff, Alex.

      Dom

      Reply
  2. Dom,
    Another incredibly insightful article! I’m sitting here on the Big Island of Hawaii right now and having a great time, so don’t feel sorry for me. As I read your articles and get caught up, I can’t wait to get back home to the waters I fish in Colorado and get rigged up with the Mono-Rig (as I’ve been hesitant to do until your recent summary article made it much clearer), and get out and find some trout that are willing to look past my errant drag-free drifts that I’d like to soon get corrected! Aloha brother!
    Greg

    Reply
    • Thanks for the support, Greg. Good luck in Colorado, and let me know how it goes.

      Cheers.

      Dom

      Reply
  3. Looking for a company that still makes 2 piece rods??????

    Reply
    • Hi Rico,

      Not many offered, right?

      May I ask why you want a two piece?

      My buddy, Steve, one time was complaining that his rod was four piece instead of 2 piece. I told him I could fix that real quick with super glue.

      Seriously, if your reason is for convenience, just keep the pieces attached. If your reason is because you believe the extra ferrules change the action or performance of the rod, then that’s different. Personally, I don’t notice the difference.

      Cheers.

      Dom

      Reply

Submit a Comment

Your email address will not be published. Required fields are marked *

Recent Articles

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

Pin It on Pinterest