Pocket and the V

by | Apr 22, 2019 | 16 comments

** NOTE ** This article is part of the Walk Along series. These are first person accounts showing the thoughts, strategies and actions surrounding particular situations on the river, putting the reader in the mind of the angler.

The river’s flowing at three times the average. So the merge point at the lower tip of the braid is indistinct, washed away in a mix of watery lines and lanes that blend together. It’s tough water to read at the surface. And yet, a close look with a trained eye — from someone who’s walked and cast through this slice of river countless times — reveals all that is needed. Imagination and memory does the rest.

Can I reach the middle break and fish to the pocket as usual? Let’s see . . .

Lean into the current with powerful, short strides. Tungsten tips dig into the limestone, anchoring the boots with each step. That’s good contact. Get through the fastest channel and around the shoot. It’s up to your chest, but keep going. Now wade the last few feet over the rock garden. I’m so glad to do this like I’m still eighteen. Live while you’re young. Settle into the sand behind the boulder. Now lean into the rock and rest. Tie the knots.

Stonefly on the point, Higa’s at the tag. Both heavy. Keep them close, because the currents in there are a mixed murder. Trout won’t come up very far through this mess, and two flies will find two different seams — spoiling the drift. But it’s a quick course, and it doesn’t have to be perfect either. Half an arm’s length apart seems about right.

Leave the V for last. From here, the merge point is obvious — distinct channels of right and left. Maybe I should chuck a cast up into the soft water behind the V, a few feet off the tip of the island — take the money shot right away? No. Save it. Work up to it. See what else you can pick up first. Learn what the currents are doing with the flies today. Start at the lower pocket. That’s a better idea. Take a look. See it first.

Aim for the nearest seam, where slower water meets fast. And don’t touch the bottom on the first two drifts. Just learn the flow. Don’t risk hanging up yet. Now cast.

That’s not enough weight to settle in, even on the slow seam. So swap the #16 Higa’s for a #14. Does that work? Cast it.

Drift, re-cast, drift. Yeah, that’s just about right. Get to the bottom now. Tuck harder, just to the corner of the rock, angle it into the flow and change the rod position as the nymph enters. Nice.

Tick, tick. Set! Too late. Set on any pause of the sighter next time. I missed that trout, but it’s good to know they’ll take the fly. I think it took the bottom nymph. Cast.

Drift the same lane. Another cast. Another. Okay, he won’t eat again. So cast six inches further, into the stall now. Lead the flies through or they’ll hang up. Lead, lead, lead. Not fast enough, and the flies snag. Pull, tug, change the angle on the hang up. No way you’re wading through that seam to recover the flies, so break ‘em off. Replace with something lighter for the stall of the pocket. There’s a backwater swirl in there. I’ve seen it under normal flows. Maybe it’s there today. #12 Walt’s. Keep the Higa’s for now. Cast and drift.

That was a good weight adjustment. Sighter is tight. Keep it vertical. Drift. Lead a little before it settles and snags again . . . strike. Ten inch wild brown. That’s good. I worked for that one.

Photo by Austin Dando

Another trout on the next cast, just a few inches further into the stall, at the same depth, right before the flies settle. Strike. Set. And there’s a long distance release on a foot long trout. Cast again.

Get over to the far seam of the pocket, now. That’ll take more weight. Go back to the stonefly. Clip. Tie the Davy. Cast again. Reach to extend the drift. Tick the bottom. Quick tug! That was a fish. I think he missed it.

Ten more casts. Improve each drift by learning from the last one. How fast is the current? How tall are the rocks on the bottom? There’s so much control on a tight line. Cast.

Another small trout to the net. Before moving, try the heavy seams on each side of the pocket. Right under your rod tip on the near side. Too fast — the nymphs never settled in. Clip the Higas, and fish with one fly for this. Add a shot, a few inches up from the Walt’s. Cast.

Eight foot drifts. Over and over. Okay, nothing on the near side, so reach to the far seam. Shuffle your boots to the edge of the sandy protection. Push your left leg into the current. Reach, drift, reach. Tuck it in harder and further up. Drift. Give a little slack. Hit it! Fish on.

He’s a little bigger than the others. Play him hard and fast. Work him into the stall. That’s where he wants to be anyway. Bring him upstream. Side pressure. Work him. Now slide the trout across the heavy current and downstream into the net. Nice fish.

Ready for the V now?

Climb over the underwater boulder. It’s deeper in front, but still wadeable on this midstream hump. Turn sideways and shuffle upstream. Should I wade into the fast seam to get within better range? Sure. Lean into the current. Cast.

Too heavy. Pull off the split shot, replace the Walt’s with a #12 Stone, and tie a Bread-n-Butter to the tag — #16. Nothing took the Higa’s anyway. Cast and drift in front of the rock, but don’t hang up here. Keep it off the bottom.

And now for the prime target . . .

Tuck the nymphs into the soft water — inside the V. Now pull them into the near current first. The lanes are subtle, but they exist. Drift. Watch the sighter and imagine the flies. Drift, tick, tick. Nice. Perfect drifts, over and over, but no trout. That’s fine. No adjustments needed. Cast.

Tuck the flies into the V again, and find the far seam. Hold the lane. Hold it. Hold it. Drift. Back off the tension a little . . . the sighter sags . . . the sighter twitches. Set the hook!

Best fish of the run. Right where he’s supposed to be. The wild trout darts downstream, into the pocket. Then he jumps and throws the hook in the air. Nice fish. And right in the spot you aimed for in the first place. Good work.

Now wade out of the break, through the heavy channel and into the head of the V. Cut back on the tippet length, go to a pair of #16’s, and pick up a few trout in the shallow channel.

Cast.

 

Enjoy the day.
Domenick Swentosky
T R O U T B I T T E N
domenick@troutbitten.com

 

Share This Article . . .

Since 2014 and 700+ articles deep
Troutbitten is a free resource for all anglers.
Your support is greatly appreciated.

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

Split Shot vs Weighted Flies

Split Shot vs Weighted Flies

So you hate split shot, right? I’ve never had anyone tell me that they like using it. But for me, split shot is a convenient and useful tool in my vest, and I think it’s underrated. It does things for me that can’t be done any other way, and I like it. Yes, I like split shot. Sure, I prefer weighted flies over having shot crimped to the line. (My nymph box is full of tungsten beaded flies.) But I also carry a selection of unweighted patterns that get a regular workout while using split shot for the weight.

Here are some thoughts about all that . . .

You’re in too Far Now

You’re in too Far Now

That large tail waved goodbye, and a sturdy wild brown trout slid back into the flow. It was a good fish for this river, and I texted a couple pictures to Burke — just to remind him that I was fishing and he wasn’t. This is what we do to each other.

I must’ve been a little too gleeful and gloating — chuckled with a little too much gusto when I hit send, maybe — because on the next cast, instant karma sent my leader and flies into the sycamores. And so began the twenty minutes of foolishness that followed . . .

Resources for Tight Line and Euro Nymphing

Resources for Tight Line and Euro Nymphing

[There’s no doubt we are in the golden age of information — for fly fishing too. Never before has it been so easy to open a browser and click a couple links to learn where the trout are and how to catch more of them. A third of what I know about fishing came from...

We watched daylight race the river downstream …

We watched daylight race the river downstream …

We added to the memories of a year gone by. A gray winter day with little sun and a lot of wind provided the last page in a final chapter — the last casts of 2016. And we watched daylight race the river downstream.

The best thing about a float is seeing miles of water as if in one frame. It’s like a filmstrip that you can take out and hold in your mind for a while. If you’ve done this long enough, then every rock around every bend carries a memory. The best island channels hold a group of those stories and offer them up as you float by. It’s a photo album: the river is a flowing film of your best and worst times on the water — moment by moment passing by. And if you’re lucky, you might create a new highlight for the reel . . .

Modern Nymphing, the Mono Rig, and Euro Nymphing

Modern Nymphing, the Mono Rig, and Euro Nymphing

Devin Olsen and Lance Egan recently released their video, Modern Nymphing. And it’s good. In fact, it’s the best video on long leader tactics that I’ve seen. It’s beautifully filmed, and it’s an excellent resource for those looking for an introduction to long leader...

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.

16 Comments

  1. This was wonderful. Gave me so much confidence on how to think through my fishing process… particularly the rate at which i could consider adjusting my rig!

    Reply
    • Right on. Most places take a lot of adjustments before you get it just right.

      Reply
  2. It made me tired just reading it.

    Reply
  3. Enjoyed this. It helps to see that others have the misses and lost fish that sometimes make me think I need to take up golf. Those days when the fish are really active and most come to the net make me wonder what I’m doing wrong on other days when fish are few and far between. I need to remember that sometimes it may not be me–and be at peace with the challenge. Still, changing up the rig and trying to figure out what might work better is essential. Every bit of learning helps.

    Reply
    • Right on. I mean, it takes a lot of work to fish hard. I think a lot of guys go out and just hope for the best, and sometimes, they hit it just right. But most days are not that way. Conditions are tough, fish are moody, etc. So it takes a lot of work, trial and error, adjustments, covering water, to hook a bunch of trout. But it’s FUN work.

      Dom

      Reply
  4. I would have like to see the stream and maybe have you diagram the situation

    Reply
      • Just some pics bro, that would suffice

        Reply
  5. Fun read, very relatable. One thing you don’t appreciate starting out, when you struggle to re-rig or even tie on a fly; how boring would it be without the adjustments…

    Reply
  6. Fascinating and a bit exhausting to glimpse another’s stream of consciousness narrative for fishing just a few of the structures on a creek. So much here. What was the writing time to actual real fishing time described ratio here? 20:1? Higher?

    Reply
    • Ha. Well I don’t know about writing time. But fishing that piece as described probably took 15 minutes.

      Cheers.

      Dom

      Reply
  7. Hi Dom,

    What is a ‘stall’? Thank you!

    Reply
    • Hi,

      I call soft water lane behind a rock the stall. It often stretches out well downstream well past the rock before merging with other lanes.

      Cheers.

      Dom

      Reply
  8. Loved it. This article is really a combination of a lot of your articles, but put into practice as one would in real time. I make far more adjustments than I once did (and I catch more fish as a result), but not nearly like this. This is a first-person view of a well-practiced flyfisher on top of his game, thinking his way through scenarios that the river presents. Pretty cool.

    Question: Why do you shorten your tippet? Let’s say you’re going from 4 feet of water to 2.5 feet. Can’t you just raise the sighter off the water more?

    Reply

Submit a Comment

Your email address will not be published.

Recent Articles

Recent Posts

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

Pin It on Pinterest