Streamer Presentations — The Speed Lead

by | Nov 18, 2018 | 6 comments

“Cast it upstream!” I hollered over the clamoring currents. Standing behind and slightly to the side of Joey, I watched his next cast land the streamer inches from the opposite bank and directly across from him. It was a good spot, but it wasn’t upstream.

“Look at that!” He said. My ten year old son turned around and smiled with pride. We’d been talking about fishing streamers next to structure for weeks.

I nodded with approval, trying to be supportive. Then I leaned in close to his ear, bending down so he could hear me over the competing current. We stood on a gravel bar, just to the side of a wide and rough section of whitewater — not an ideal place to race a streamer broadside across the river. Joey launched and retrieved two more casts as I explained.

“Joe, I want you to make the cast upstream.” I pointed up and across the river. “I know we want to put the streamer around structure, so let’s aim for just above that rock. See it under the water? Good. So shoot the streamer up there, and let it sink to the bottom for a second, kinda like when we tight line a nymph. Then we’ll lead it downstream so it doesn’t stick to the bottom. Lead it a little faster than you think you’d lead a nymph.”

One of Joey’s strengths is how eagerly he wants to learn — how he listens and then follows through. He’ll try anything if you teach him well.

On the second cast, he plunked the streamer upstream of the target rock. The fast current washed his streamer downstream a few feet, until the weight of the conehead took over and stabilized the drift. Joey recognized all of this intuitively — a skill that comes only from thousands of fishless casts — and he stayed in contact with the streamer from the beginning. He used a combination of the rod tip and slow hand strips to keep the streamer moving downstream.

He was close, but it wasn’t quite right.

“Faster,” I said. “Keep it moving along faster than the current, but not too much.”

“I got it, Dad,” Joey said with some hint of impatience. (This trait is growing stronger as he approaches his teenage years.)

So I backed off and walked to the leafy bank. I left him to fish for a while as I strung up my own rod with the same long-leader rig and a heavy streamer. Mine was smaller than the three-inch fly Joey was fishing, and in just a few casts, I caught our first trout of the morning on the speed lead. A few minutes later, another wild brown trout came to hand.

Then I saw Joey reel up, back off the gravel bar and walk upstream to join me at the edge of the pocket water I was working.

“What am I doing wrong?” he asked.

“Watch, buddy,” I replied.

As I made a dozen more casts, I chose a new landing zone every time.

“Every cast is a new target. There’s structure everywhere. Each one of those pockets is made by a rock, so that’s more structure, right? I pick a new target, then drift down a different seam each time too.”

I looked to Joey to see him watching my sighter and where my line entered the water.

“Good,” I said. “Now watch my rod tip. Watch my line hand too. Sometimes I change the angle of the rod tip and strip a little faster so the fly comes across the currents . . . like that. Right? But I’m mostly keeping the fly in one seam, keeping it on a path and leading it downstream. I keep it close to the bottom and lead it with speed

A good sized trout charged my fly for a couple feet, and we both let out an OHHH! as we saw it flash.

“There we go. Now you try it,” I said.

Joey stepped into the water in front of me. I kept quiet for a handful of drifts before I spoke up.

“Okay, you’re nymphing it,” I said. “But that’s not what we want to do.”

“It might work.” Joey argued.

“Of course, but that’s not the speed lead.” I moved in closer again, and from just behind him, I pointed to a new target. “Put it right in the whitewater behind that big rock, and lead it down on the edge of the seam, right next to the slow stall. Keep it moving through,” I said. “And give it some jigs this time. Pulse it.”

Joey hit the target on the next cast and did exactly what I’d described with the fly. On the second pulse, another good trout flashed and ate the fly.

That’s the speed lead,” Joey shouted. And he set the hook like Cyril Chauquet (of his favorite fishing show, Chasing Monsters.)

Just wants to fish

Refine it

As I told Joey, the speed lead is not just “nymphing the streamer.” But thinking of it that way is a good place to start.

Get the fly into the water and on the river bottom. Then work the streamer down through the natural lane. Bring it along faster than the bottom current.

Experiment with speeds. Sometimes a rate twice as fast as what the river is flowing works best. But more often, the sweet spot is a speed that brings the fly downstream slightly faster than the current.

Go ahead and experiment with depths, too. But the speed lead works best when the streamer is close to the bottom.

There are times when the wading angler has an advantage over the boat angler. This is one of them. The speed lead is easier to refine on foot than from the platform of a boat.

Head first

Notably different than the slow slide, which I wrote about a couple weeks ago, the speed lead is not a broadside approach. Although,no one can really predict where the trout will be when it sees your fly, trout won’t see a broadside, full profile as often with the speed lead.

Like any streamer presentation, my focus — my concentration — is on the direction of the head of the streamer. With the speed lead, the head should be pointed downstream.

Photo by Josh Stewart

Jig | Strip | Pulse | Track

The base drift is as simple as gaining the bottom and leading the fly, with speed, through one seam.

But success with streamers is about variation. And I constantly give trout a new look, until I find something that we agree on.

Try slight jigs. Keep them small. Think about what a sculpin does, what a black nosed dace does or what a crayfish does, and emulate that. Big jigging motions usually move the fly too much for this presentation.

Same with strips. Big, fast strips move the fly too much. Try slow strips, small strips, looooong strips, in addition to recovering the slack with your line hand.

And try bringing the fly across stream a bit, drift it into the next lane. Do this by changing the rod and line angle, like I showed Joey.

Many times, you’ll find one look that interests trout more than others.

Rig

If you’re a Troutbitten regular, it will come as no surprise that I like the Mono Rig for the speed lead. With the extra long leader, I have more precise control over every way the fly moves. I can slow it down and hold it on the bottom, or I can swerve into the next lane at any moment.

I also fish the speed lead technique with a floating line and even a sinking line. Ultimately, it’s about the principle of getting the fly to the bottom, and leading it with speed downstream. Think about those things, no matter what line and leader you’re connected to, and you’ll have it.

READ: Troutbitten | Streamers on the Mono Rig

Flies

The flies are perhaps the least important part of this technique. I say that because you can make any fly work with the speed lead — even a buoyant, unweighted streamer can be used by simply adding some weight in front of it. (I use split shot.)

However, for more precision, more efficiency, and more trout in the net, use heavy flies that hug the bottom. Use flies with lead eyes, heavy cones or beads instead of deer hair.

The speed lead works best with smaller flies. Save the five-inch monsters for another job. Big flies catch too much current for the speed lead. And it’s hard to keep them riding on the bottom.

I like Rich Strolis’ single hook headbanger for this. When tying the fly, I add some weight to the hook shank as well, for that extra bit of get-down.

Try George Daniel’s Bunker Buster. An overlooked fly, this style, with the molded lead head on a jig hook is the perfect streamer for the speed lead.

The Bunker Buster Streamer

Many of us have been fishing simple jigs like these for years. It’s hard to beat a round-head jig for riding the bottom effectively without hanging up.

My friend, Josh Stewart, gets credit for naming this technique. In a conversation about how we fished the jig fly variations, Josh mentioned what he called the speed lead. And as a writer, how could I not love the alliteration and the simplicity that so perfectly describes the tactic?

My versions of Josh Stewart’s Sparkle Jig

And then . . .

When the speed lead doesn’t work, try something else. Move through some variations with jigs and strips and lane changes before you give up on it, though. And after all that, when trout still won’t eat it, go to the slow slide or the jerk strip. Keep showing trout something different. That’s streamer fishing.

And if none of it works, fish nymphs for a while and catch some trout.

Fish hard, friends.

 

Enjoy the day.
Domenick Swentosky
T R O U T B I T T E N
domenick@troutbitten.com

 

Share This Article . . .

Since 2014 and 600 articles deep
Troutbitten is a free resource for all anglers
Your support is greatly appreciated

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

The Tight Line Advantage Across Fly Fishing Styles

The Tight Line Advantage Across Fly Fishing Styles

I first picked up fly fishing as a teenager, and I vividly remember the confusion. With time, I learned to cast the weight of the line rather than the weight of the lure, but I didn’t know what to do with the line after the cast. Sure, I learned about mending, but that never seemed to solve the problems at hand. Enter, tight lining concepts . . .

Levels, Resets and New Beginnings

Levels, Resets and New Beginnings

The frequent chance for a purely new beginning is one of the joys of small to medium sized rivers. It keeps us hopeful. Forgiveness comes at the next level — across the next lip. This is the time for a deep breath and renewed determination. Because in the next level, over fresh trout that are unwise to our presence, all of our plans will come together. This we believe . . .

Leaders in the Troutbitten Shop

Leaders in the Troutbitten Shop

Troutbitten leaders are now available in the Troutbitten Shop. These are hand tied leaders in four varieties: Harvey Dry Leader, Standard Mono Rig, Thin Mono Rig, and Micro-Thin Mono Rig. Standard Sighters are also available, and they include a Backing Barrel. The Full Mono Rig Kit contains each of the three Mono Rig leaders.

All Troutbitten leaders come on a three-inch spool, making long leader changes a breeze.

Design and Function of the Troutbitten Standard Mono Rig

Design and Function of the Troutbitten Standard Mono Rig

Here, finally, is a full breakdown on the design of my favorite leader. It’s built for versatility without compromising presentation. It’s a hybrid system with an answer for everything, ready for fishing nymphs on both a tight line and under an indy. It fishes streamers large and small, with every presentation style. It’s ready for dry dropper, wet flies, and it even casts single dry flies. All of these styles benefit greatly with a tight line advantage.

Anglers in contact are anglers in control. It’s fun and effective, because we know where the flies are, and we choose where they go next . . .

VIDEO | Streamers on the Mono Rig: Episode 2 — Casting

VIDEO | Streamers on the Mono Rig: Episode 2 — Casting

The Troutbitten video series, Streamers on the Mono Rig continues with Episode Two, covering the unique possibilities and the demands of casting.

Fishing streamers on the Mono Rig offers anglers ultimate control over the direction and action of their flies — all the way through the drift. And while small streamers may need nothing more than a nymphing-style cast, mid-sized and full-sized streamers require a few changes in casting to get the most from the technique . . .

You Need Contact

You Need Contact

Success in fly fishing really comes down to one or two things. It’s a few key principles repeated over and over, across styles, across water types and across continents. The same stuff catches trout everywhere. And one of those things . . . is contact.

. . . No matter what adaptations are made to the rig at hand, the game is about being in touch with the fly. And in some rivers, contact continues by touching the bottom with something, whether that be a fly or a split shot. Without contact, none of this works. Contact is the tangible component between success and failure.

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.

6 Comments

  1. Dominic, 2 questions:
    With the Speed Lead, does the drift end as it reaches you, or continue into a broadside drift downstream?
    Are those 1/8 ounce jigheads on those patterns?

    Great tips, thanks!

    Reply
    • Hi Stephen. Good questions.

      First, I do both — I often pick up once the streamer is across from me, but just as often, I finish out the drift with a partial swing and some animation. I try to find whatever the trout want at the moment.

      Regarding the jig head size: I use 1/32, 1/16 and 1/8 oz jig heads.

      I buy them from a seller on ebay who pours the heads on Mustad hooks. I then use Pro Tec Powder Paint to easily color the heads. It’s kinda fun. And fishing the jigs is definitely fun.

      Reply
      • Also, I’m not having any luck finding pattern descriptions for the sparkle jigs or bunker buster streamers. Any resources, or a few more photos? Thanks…they look really fishy.

        Reply
        • Hi Stephen. I promise I’ll get there soon.

          Email me if you don’t want to wait for those patterns.

          Reply
  2. Hey Dom,
    You mention flies to sue toward the end. I am sure you tie yours but do you know of any places a person could purchase some of these preferred streamers? Interested to pick up a few. Thanks!

    Reply
    • Hey man, I don’t know anywhere online to purchase those streamers online, honestly. But I have a couple friends who are professional tyers, and I can give you their contact info. They will tie exactly to your specifications and tie perfect flies at a fair price. Email me for the info if you like.

      Reply

Submit a Comment

Your email address will not be published. Required fields are marked *

Recent Articles

Recent Posts

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

Pin It on Pinterest