Streamer Presentations — The Deadly Slow-Slide

by | Oct 10, 2018 | 16 comments

The best thing about fishing streamers is how different it is from everything else we do on a fly rod. Precision dead drifts? Delicate casting and thin tippets? Forget that. Slinging the big bugs is the antithesis against what the rest of fly fishing is all about. Or at least, it can be.

Everything works sometimes. We can present a streamer at almost any angle or speed and have a fair expectation to fool a trout. This makes sense because streamers imitate baitfish, creatures with an ability to move — to dart, dive and swim through the water. And they often do this unpredictably, just like our streamers.

I do think there’s an over-focus on movement in the modern streamer game for trout. These days, fast action, furious stripping and big flies have become the standard for many anglers. All of it works on the right day, and all of it is in my toolbox for long-fly techniques.

READ: Troutbitten | Streamers as an Easy Meal | The Old School Streamer Thing

But there’s a particular presentation that I’ve come to rely on more than any other, lately. It mimics a more available food form for trout, but it’s not a dead drift. The line and rod hand adjustments are subtle, but the presentation is active. It’s a bank or structure approach. It gets the trout’s attention. And it’s deadly.

I call it the slow-slide.


Find the best structure in sight — the stuff where you most expect Bad Mr. Brown to make his home. That might be a line of rocks in the middle of the river, a drop-off ledge or the transition line of a gravel bar. Fair enough. But every mile of every river on the planet has two borders on opposing sides. So let’s focus on a stretch of bank water for now. Here we go . . .

Positioned within range of that bank, make a cast mostly across and partially upstream. Tuck the fly in as close to the bank as you might, with a straight line and not much slack.

After the landing, it’s time to think about the orientation of the head. Manipulate the rod tip, line and leader so the streamer is looking back toward you, across stream and down. It will maintain that across and slightly downstream orientation until the very end of the drift. (But the streamer no longer looks at you once it has passed downstream of your position.) Usually, a soft strip or lift of the rod is all that’s needed to orient the head of the fly in the right direction after the cast.

Critically, it’s important not to strip the fly off the bank seam right away. Instead, allow the fly to hold that seam for a few feet as it begins its trip downstream. Eventually, the fly should travel out into the next seam, maintaining its broadside look to an upstream facing trout. It may end up five feet off the bank, fifteen feet, or even further. That’s up to you and how long the drift is. But the streamer’s progress should be mostly downstream and not across.

That’s the slow-slide.

Here’s a series of illustrations by our friend, Dick Jones, to show the slow-slide . . .



In the above illustrations, the streamer only comes off the bank about 5-10 feet. That’s a great approach. But remember, on longer drifts, the streamer can also make more progress across the currents. It’s all situational.

Why trout buy it

The slow-slide mixes together elements of a dead drift and those of an active presentation. Most of the fly’s path is downstream. It is not crossing multiple currents and running away from the bank, so we’re not asking a trout to give chase very much. By contrast, a quick-strip style of presentation moves the fly away from the trout a lot more.

The streamer seductively slides across currents near structure. It holds the line longer, staying closer to the bank and closer to cover. Instead of stripping and moving the fly away from the trout’s home, we keep it within range. It’s more available for more moments. Sliding slowly across only the currents near the bank, the fly shows a sure thing to uncertain trout.

Importantly, the broadside orientation gives trout a complete look of the profile, often triggering more strikes than an upstream or downstream angle does. We tie flies and use larger patterns to present a larger meal to trout — something different. So show it to them.

READ: Troutbitten | Modern Streamers: Too much motion? Are we moving them too fast?

What to do during the drift

After the cast, it’s important to set the orientation of the streamer’s head. Most often, that also sets the proper angle of the line and leader. Your primary job throughout the drift is to maintain the streamer’s orientation for as long as possible. That may require nothing more than drifting the rod tip downstream and allowing the belly of a line to slide the streamer slowly across the currents. But real world setups are difficult. You might need to perform line mends to maintain the required tension — to hold the bank seam longer and keep the streamer’s orientation across and slightly downstream. It’s up to you.

It can be difficult to refrain from stripping the fly as usual. Don’t do it. A standard strip of ten or twenty inches will move the fly across the currents, defeating the slow and the natural cross-current slide we’re trying to achieve. Instead, focus first on maintaining the head angle. Manipulate the line if necessary, but don’t strip the fly.

Small, subtle jigs and rod twitches are excellent add-ons, once the drift is established. Often, I give two presentations to one target. The first drift is without added movement, and the second drift is with rod tip animation and mini-strips.

Usually, the natural belly and tension of the line against the currents performs the slow-slide for you. But in some situations, it may be necessary to strip slowly, to help the streamer slide across the currents.


What depth?

Ironically, I discovered this presentation after dark. While night fishing, I was repeatedly rewarded by getting the slow-slide just right. In water that produced nothing with other approaches, I got hammered by big fish on the slow-slide. At night, this works best with streamers and wets riding near the top, perhaps no more than a foot under the surface.

READ: Troutbitten | Category | Night Fishing

It worked so well after dark, that I started using it in the daylight.

On my favorite waters, it’s a rare day when trout charge from any significant depth to eat a big streamer near the surface. More often, good streamer fishing begins with getting the fly down to the fish.

I employ the slow slide with weighted flies or split shot. You can also use sink tips, poly leaders or sinking line — whatever it takes to get the fly to a depth the trout prefer and keep it there.

I’ll mention this: heavy streamers or too much weight on the leader might be good for active stripping and fast presentations, but they aren’t good for the slow-slide. Too much weight sinks the streamer to the bottom and sticks it there. The ideal weight is just enough to counteract the current’s tension on the line. Find that, and you’ll have a good slow-slide. When covering a lot of water, it may take frequent weight adjustments to keep everything just right.

Depth, therefore, is up to you. The slow-slide is effective throughout the water column. You just have to know your fish and your water.

Boating or wading?

The slow-slide works both on foot and from a boat.

While wading and like to walk a line about twenty to forty feet from the bank. Often I prefer to wade downstream, letting the currents help push me along and cover more water. But I still fish upstream and across.

When the river is too big to allow for wading far enough from the bank, I wade upstream through the shallower side water, hugging the bank seam and casting up. It can work, but getting the right slide is more difficult. Also, if I’m standing in the water where the slide should take place, my drifting range is limited.

From the raised platform of a boat, the slow slide is excellent. You have a better chance of seeing the orientation of the streamer and watching the exciting strike of a trout. From that elevated perch, you also have more command over the line on the water. And that’s a good thing, because down-current mends are often required to keep the fly progressing downstream and sliding across the seams. A slow, continuous strip may be necessary as well. And it’s helpful to ask your oarsman to slow the boat slightly.

Lines? Leaders? Flies?

I like to use the the slow-slide on a Mono Rig, but just as often, I use fly line to make it happen. Often, neither setup is necessarily better for the slow-slide, and it’s just a preference for how I want to fish.

Likewise, fly selection is not critical to the tactic. Small, large or over-sized streamers can all be presented on a slow-slide. Remember, finding the right weight is the most important element of the streamer.

Just take the principles of the slow-slide, adapt the fly line and leader type to the water and make it happen.

So what . . .

The casual angler may look at something like the slow-slide and immediately lump it into another familiar tactic. He might say, “Sure, I’ve been doing that forever.” And maybe he has. I know that I’ve been doing similar things for years.

READ: Troutbitten | Angler Types in Profile: The I’ve been doing that forever guy

The slow-slide is a lot like the way some anglers present wet flies. It’s also similar to what another friend does when he says he’s “Just driftin’” his streamers.

But I suggest that you fish with more intention — with more accuracy. Present your flies with a targeted approach. Good fly fishing is always about the small things — the minor adjustments that make a huge difference.

Try the slow-slide. Hit the bank, orient the head and keep it that way throughout a drift. Keep the streamer drifting downstream and sliding slowly across the seam that’s closest to the bank. Then hold on tight.

Fish hard, friends.

** Read all Troutbitten articles about Streamers HERE **


Enjoy the day.
Domenick Swentosky


Share This Article . . .

Since 2014 and 900+ articles deep
Troutbitten is a free resource for all anglers.
Your support is greatly appreciated.

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

What to Trust

What to Trust

The tall man crossed the old railroad bridge above me. He paused at the midpoint, lingered and watched me cast for a moment, then he bellowed downstream to me with a voice full of triumph. “I caught a bunch! They’re taking Zebra Midges just under the surface.” “Not...

Night Shift – Into the Dark

Night Shift – Into the Dark

You can't stand up to the night until you understand what's hiding in its shadows.  -- Charles De Lint Last June I made a commitment. I promised myself that I would go deep into the night game and learn to catch the wildest trout in the darkest hours. Having spent a...

Efficiency: Part 2 – Leader/Tippet Changes

Efficiency: Part 2 – Leader/Tippet Changes

  My best days on the water are usually full of changes. The morning fog burns off, and I switch from streamers to nymphs; a half hour later, a swirling back eddy looks like the home of the next nameable brown trout (two footer), and I go back to...

Efficiency: Part 1 – Knots

Efficiency: Part 1 – Knots

"You can't catch a fish without your fly in the water." Efficiency has become a game for me; it's something I enjoy; it's something I think about when I'm not fishing, and I'm constantly trying to improve on a system that keeps my flies in the water and the downtime...

DIY – Bar Boots

DIY – Bar Boots

I burn through boot soles fast. And cheap boots with poor foot support are a bad idea when you're wading heavy runs and putting full days on the water with lots of hiking, so I was spending about $150 every ten months on a new pair of boots. I used to resole my own...

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.


  1. How is your strike to hook up ratio on the slow-slide? I would expect it to be much better than fast-stripping monster streamers. Oh, and don’t forget to mash the barb. I’m finding more trout with disfigured jaws thanks to the go big or go home streamer craze.

    • Good question. Yeah, it’s better. Point is, they eat it rather than just chase it away. Still plenty of refusals, because big flies just have more for trout to reject, but overall much better hookup ratio.


      • Give Mayers micro(pine squirrel)leech a try to up your eats. Awesome fly.

      • Trying to achieve a dead drift for as long as possible has caught countless nice fish,although exclusively use bugger instead,rarely over 1 and a half. Trout will sometimes eat so aggressively can’t even see bugger,luckily only once minor bleeding. Find way more hits on drift then swing,even fewer on retrieving. I find my 10.6 rod much easier to control line then 9ft,and simple to lift line and rollcast ,sliding down river,working bank. Largest brown ever caught mid day,slow shallow water,right up against bank. Fish way longer then net at that time,no chance of remotely fitting!!

  2. Great post Domenick, I’ve caught uncountable trout using that method and a sparkle minnow. It really kicks butt.

  3. Excellent piece. I shall definitely add this presentation to my armoury.
    One of the guys who hugely effected my fly fishing is a gentleman called Jeremy Lucas. I doubt any of your readers will know him but he is ok with a fly rod.
    He suggests viewing our presentation from the perspective and eyes of the trout (which have no where near the clarity of our vision). People say “yeah I’ve been doing that forever” but I think it’s incredibly hard to do consistently.
    For some reason I can see it being easier to visualise with the slow slide.

  4. For the most part I fish medium sized streams, and really enjoy streamer fishing for trout and small mouth bass. I use older flies such as black and gray ghosts, buggers and dace. I use a very similar technique and try to keep my fly as close to the structure as long as I can. Once the current starts to swing the fly out I generally use short quick strips at the same interval. The larger fish hanging on the cover usually slap real fast and hard in the first few seconds. Smaller fish seem to hit closer to the end of the swing. Of course nothing works all the time, so as I have learned always be flexible and be willing to change things up.

  5. Hi Dom,
    Do you have an example of the favorite flies and tippet for this presentation where you said: “The ideal weight is just enough to counteract the current’s tension on the line. Find that, and you’ll have a good slow-slide.”? Perhaps for medium size trout in the lower to mid teens using a 5 wt rod?

    • Not sure what he uses but on Truckee olive buggers,with variation of heads,titanium for quick sinking,beads for slow,and even weightless for fishing shallow rapids. Usually tie my buggers with different colored chenille,lately olive and reddish color been killing. Guess should try streamers but these buggers have been so easy to tie and so productive just using them

    • Hi Mike.

      Sure thing.

      So, the size of trout doesn’t matter at all. Neither does the rod. When I say this:

      “The ideal weight is just enough to counteract the current’s tension on the line. Find that, and you’ll have a good slow-slide.”

      I mean the weight of the fly. Usually, it’s much lighter than I normally fish.

      To answer your question, and for a very general example, choose a medium weighted # 6 Bugger, with about 15 wraps of .020” lead. Imagine a current that is flowing at a brisk walking pace. Those two would be a good match for the slow side. But if you used a Headbanger, or any much heavier fly, it would likely be too much weight for such a current. It would sink too much and require too much retrieve to keep it off the bottom.

      Make sense?


  6. The graphics are really helpful. Thanks. I’ll even work on this for smallmouth.

  7. The graphics are really helpful. Thanks. I’ll even work on this for smallmouth.

  8. This is great. We chuck some streamers down in Chilean Patagonia, and quite a bit this is our go to technique for clients etc..

    Very well written article! First time viewer on this site.



Submit a Comment

Your email address will not be published.

Recent Articles

Recent Posts

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

Pin It on Pinterest