Quick Tips — Unbutton Snags from the Backside

by | Sep 25, 2018 | 7 comments

Get your nymphs down to the fish. Put them in the strike zone — low — where the trout live. Keep your streamer near the rock bed because that’s where the baitfish are. Cast your flies over by that wet log. Trout love structure.

It’s all true. And to fish well, to be effective with our underwater patterns, we must take chances. Get low, but not so low that you hang up every cast. Target the structure and get close, but not so close that you drive the hook into a dead log.

Snags happen.

I’ve fished with guys that see every hang up as a failure — every lost fly as a mistake. But inevitably, that mindset breeds an overcautious angler, too careful and just hoping for some good luck.

Hang ups are not a failure. For a good angler, they are a calculated risk — an occasional consequence after assessing probability against skill, situation and loss. We all hang up the fly sometimes. So what.

Now let’s talk about how to pop loose the underwater snag.

Don’t drive it home

Let’s assume you cast upstream and the fly is drifting back down toward you when the line stops.

Good fishing is about being in contact with the flies. So the instant the fly stops (whether it touches a rock or a trout’s teeth) we should see or feel it. Usually, we set the hook.

And that’s a good thing. Since we set when the line pauses, the fly doesn’t have much chance to bury itself underneath a complicated mass of rocks and tree parts. When the angler’s rig is in touch with the flies, most snags end up on the edge of something — like a rock.

When we set the hook on a rock, the worst thing to do is keep setting the hook into the rock. Don’t do that. Don’t pull downstream over and over and expect the fly to come out.

Instead, reach out with the rod tip and pull up. Then try a tug sideways.

Get on the backside

When that doesn’t work, wade to an angle that gets your rod tip behind the fly — upstream from where it came. Often, it takes only a step or two. With a long fly rod we can reach behind the nymph and pull it out in reverse of the way it went in.

The backside angle does not need to be direct. If you get any kind of upstream pull, the snag often releases with little effort.

Yup

So the next time you trout-set on a stick-fish, don’t drive the hook home with another hard pull. Change the angle and pull from the backside.

If you’re lucky, it’ll pop loose.

 

Enjoy the day.
Domenick Swentosky
T R O U T B I T T E N
domenick@troutbitten.com

 

 

Share This Article . . .

Since 2014 and 700+ articles deep
Troutbitten is a free resource for all anglers.
Your support is greatly appreciated.

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

Reading Water — Every Rock Creates Five Seams

Reading Water — Every Rock Creates Five Seams

Downstream of every rock are three obvious seams: the left seam, right seam and the slower seam in the middle. That part is easy. But the most productive seams are more hidden, and many anglers seem to miss them altogether. These are the two merger seams, where each fast seam meets the slower part in the middle. And if I had to pick just one target area, day after day and season after season, I would surely choose the merger seams . . .

The Tight Line Advantage Across Fly Fishing Styles

The Tight Line Advantage Across Fly Fishing Styles

I first picked up fly fishing as a teenager, and I vividly remember the confusion. With time, I learned to cast the weight of the line rather than the weight of the lure, but I didn’t know what to do with the line after the cast. Sure, I learned about mending, but that never seemed to solve the problems at hand. Enter, tight lining concepts . . .

Levels, Resets and New Beginnings

Levels, Resets and New Beginnings

The frequent chance for a purely new beginning is one of the joys of small to medium sized rivers. It keeps us hopeful. Forgiveness comes at the next level — across the next lip. This is the time for a deep breath and renewed determination. Because in the next level, over fresh trout that are unwise to our presence, all of our plans will come together. This we believe . . .

Leaders in the Troutbitten Shop

Leaders in the Troutbitten Shop

Troutbitten leaders are now available in the Troutbitten Shop. These are hand tied leaders in four varieties: Harvey Dry Leader, Standard Mono Rig, Thin Mono Rig, and Micro-Thin Mono Rig. Standard Sighters are also available, and they include a Backing Barrel. The Full Mono Rig Kit contains each of the three Mono Rig leaders.

All Troutbitten leaders come on a three-inch spool, making long leader changes a breeze.

Design and Function of the Troutbitten Standard Mono Rig

Design and Function of the Troutbitten Standard Mono Rig

Here, finally, is a full breakdown on the design of my favorite leader. It’s built for versatility without compromising presentation. It’s a hybrid system with an answer for everything, ready for fishing nymphs on both a tight line and under an indy. It fishes streamers large and small, with every presentation style. It’s ready for dry dropper, wet flies, and it even casts single dry flies. All of these styles benefit greatly with a tight line advantage.

Anglers in contact are anglers in control. It’s fun and effective, because we know where the flies are, and we choose where they go next . . .

VIDEO | Streamers on the Mono Rig: Episode 2 — Casting

VIDEO | Streamers on the Mono Rig: Episode 2 — Casting

The Troutbitten video series, Streamers on the Mono Rig continues with Episode Two, covering the unique possibilities and the demands of casting.

Fishing streamers on the Mono Rig offers anglers ultimate control over the direction and action of their flies — all the way through the drift. And while small streamers may need nothing more than a nymphing-style cast, mid-sized and full-sized streamers require a few changes in casting to get the most from the technique . . .

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.

7 Comments

  1. I find throwing a roll cast or two on the back side of the snag will dislodge it most of the time

    Reply
    • Thanks Jon, that’s a good tip when you have enough fly line involved. But for most of us long liners, that’s one of the downsides — no roll casts.

      Reply
  2. I learned from Front Range legend Ed Engle, you gotta lose flies to catch fish. So I do more of both now. I’ll take that trade-off! A guy near you, Domenick, Matt Kowalchuk of the Feathered Hook, helped me get better with this fly-freeing technique you just wrote about. I’ve gotten better at it and it really helps you save your flies, and reduces the time when you’re not fishing.

    Reply
  3. Yes, spot on, that works for me, I get upstream and try gentle pulls first, then tension on the line and tap the rod, and circular movements with the rod tip as well, final try is to let the line go slack, then pull again with the rod tip down in the water to get another angle. On most of my waters, I can wade over and reach down and pluck the nymph out if all thats failed-making sure my feet are well planted and bending slowly to avoid joining the nymph on the snag LOL. I like to get stuff back in when I can as I don’t like leaving hooks and or nylon behind.

    Reply
  4. Nice post, another way is to do a roll cast that goes beyond where the fly is hooked then gently lift up at the end.

    Reply
  5. I have had some luck stripping some line off my Reel and sending a roll cast towards my fly.

    Reply

Submit a Comment

Your email address will not be published. Required fields are marked *

Recent Articles

Recent Posts

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

Pin It on Pinterest