Quick Tips — Hang up or Hook up

by | Sep 5, 2018 | 2 comments

Up top or underneath, we must cover water to catch trout in a river. My days astream are a constant push and pull between reasons to stay and reasons to move on. Hanging around in a tailout for an extra fifteen minutes may be wise if I see swirls and flashing trout at the lip. But moving on and working more water is my default approach. The challenge, then, is knowing when to give up the ship and knowing when to stay on. And for that, I have a strategy — hang up or hookup.

I fish the sweetest spots until I either hook a trout or I hang the fly on something other than a trout’s jaw.

I remember watching fishermen at the bridge holes when I was a boy. And I never much understood the allure of plunking a five gallon bucket on the bank and casting over and over to the same spot — to the same trout. Later, I learned the distinction between stocked and wild trout. Sure, there may be a pod of recently stocked trout hanging in the shade of the the bridge abutment, but I won’t give them all day to make a decision. I find a reason to move on. And usually it’s hang up or hookup.

One point here: Most of the water I cast to is wadeable, and I’m the guy who goes in for the snag rather than breaking off the fly. I don’t like leaving hooks and leader parts on the bottom of the river or the neighboring trees, and I don’t like the empty slot in my fly box. I figure if it takes me two minutes to untangle a fly from a wet tree branch, and it takes me five minutes to tie a fly at the vise, then I win everytime I rescue my fly.

I’ve previously written about working into the prime spots — about not aiming for the bullseye right away. Instead of going for the jackpot on the fist cast, I like to pick off a few targets on the perimeter.

READ: Troutbitten | Work into the Prime Spots — Fifty Tips #42

I work up to a prime lie, casting nearby as I approach it. But once I’m there, once I’m casting to the sweet spot, I don’t leave until I either hook up with a trout (or two, or three), or I hang up on an obstruction and must retrieve the fly.

Courage

John played it cautious at the outside bend. He waded into the middle current and cast toward the roots until his yellow #6 Charlie Boy Hopper landed three feet from the root wad. It was a big chunk of tangled organic ropes separated from the earth and broken from its parent tree. Bowled over and turned topsy turvy, the mass had temporarily lodged at the outside bend of a side channel, awaiting the next major flood to come and plow it over again.

John cast as close as he dared the second time, and the foam grasshopper landed within a foot of the roots. The rubber legs jiggled in the current. The tippet went slack. The grasshopper copy drifted like the real thing.

Then Mr. Brown took a look from underneath. Hunkering under the safety of a foot-wide slab of spruce, he slid out for a moment, but he stopped. Generations of learned instinct made the decision for him. The grasshopper was too far away. Too risky. Mr. Brown slid back under the dark spruce, and John moved upriver too.

The pair would never meet. It’s a sad story.

Photo by Bill Dell

Get ‘em next time . . .

Next time you’re at the outside bend, take a chance at the watery stump. Cast to its perimeter as you approach, and target the prime water when you’re in the best position. But before you leave, take a chance. Cast the fly close enough to the stump to either hang it up on a root or bury the hook in a trout’s jaw.

Dry fly, streamer, wet fly, nymph — the same rule applies. Throw a streamer in for some danger. Risk more.

And while you’re nymphing a juicy swirl that you know holds fish, don’t leave until you hook a trout or you finally hang up on something deep. If you snag the fly, at least you know you took the presentation to the bottom and down to the trout. Wade out, get the fly back and move on.

Then treat the next prime spot with the same approach. Hang up or hookup.

Fish hard, friends.

Photo by Matt Grobe

 

Enjoy the day.
Domenick Swentosky
T R O U T B I T T E N
domenick@troutbitten.com

 

Share This Article . . .

Since 2014 and 600 articles deep
Troutbitten is a free resource for all anglers
Your support is greatly appreciated

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

A Simple Slidable Foam Pinch-On Indy

A Simple Slidable Foam Pinch-On Indy

One of the joys of fly fishing is problem solving. There are so many tools available, with seemingly infinite tactics to discover, it seems like any difficult situation on the water can be solved. Perhaps it can. For those anglers who search for answers in tough moments, the prospect of solving a puzzle builds lasting hope into every cast. And after seasons on the water, the game becomes not how many trout we can catch, but how many ways those trout can be caught. Then, when presented with conditions that chase fair-weather fishers off the water, we rise to the moment with a tested solution, perfectly adapted and suited for the variables at hand.

There is not one way. There are a hundred ways. And the best anglers are prepared with all of them.

One of them is the slidable foam pinch on indy . . .

Perfect from the Start

Perfect from the Start

Never underestimate how far away a trout can see upstream. And never underestimate how far away a trout will refuse a fly. It might drift perfectly, right past the trout. But the decision — the refusal, may have already been made with the fly twenty feet upstream.

Here’s more . . .

Tight Line and Euro Nymphing: How to Lead the Flies

Tight Line and Euro Nymphing: How to Lead the Flies

Leading does not mean we are dragging the flies downstream. In fact, no matter what method we choose (leading, tracking or guiding), our job is to simply recover the slack that is given to us. We tuck the flies upstream and the river sends them back. It may seem like there is just one way to recover that slack. But there are at least two distinct methods — leading and tracking.

Let’s talk more about leading . . .

What water type? Where are they eating?

What water type? Where are they eating?

Fast, heavy, deep runs have always been my favorite water type to fish. I can spend a full day in the big stuff. I love the mind-clearing washout of whitewater. No average sounds penetrate it. And the never ending roar of a chunky run is mesmerizing. I also enjoy the wading challenge. The heaviest water requires not just effort, but a constant focus and a planned path to keep you upright and on two feet. Constant adjustment is needed to stay balanced, and one slip or misstep ends up in a thorough dunking. It reminds me of the scaffold work I did on construction crews in my twenties. I always enjoyed being a few stories up, because the workday flew by. When every movement means life or death, you’d better stay focused. I always liked that . . .

Tight Line and Euro Nymphing: Leading vs Tracking vs Guiding

Tight Line and Euro Nymphing: Leading vs Tracking vs Guiding

Eventually, after decades of drifting things for trout, I discovered other ways of fishing dead drifts.

And now, I try to be out of contact as much as in contact. I ride the line between leading the flies and tracking them — choosing sometimes one and sometimes the other. And I’ve come to think of that mix of both styles as guiding the flies.

Think about these concepts the next time you are on the water with a pair of nymphs in hand. What is your standard approach? What are the strengths of leading the flies? What are the deficiencies? When does tracking the flies stand out as the best tactic? And when does it fail?

Why do we miss trout on a nymph?

Why do we miss trout on a nymph?

Late hook sets are a problem, as is guessing about whether we should set the hook in the first place. But I believe, more times than not, when we miss a trout, the fish actually misses the fly. However, that doesn’t let us off the hook either. It’s probably still our fault. And here’s why . . .

Loss of contact, refusals and bad drifts. All of these things and more add into missing trout on nymphs. So how do we improve the hookup ratio?

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.

2 Comments

  1. Thanks for another great post Dom. I often struggle with how much longer I should stay and fish a given spot. My practice up until now has been to make 5-10 “perfect” drifts through the prime lie before allowing myself to move on. But that assumes I’m getting my flies down to the right depth which looking back, I don’t actually know if I’ve been doing or not. Hang up or hook up solves that problem. I’m also assuming that the reason to move on after hanging up is because you’ve spooked any willing fish by wading through the prime lie to retrieve your fly?

    Reply
  2. Excellent, totally agree, I’ll keep casting and changing rigs until I hook a tree or a snag and have to wade further in and retrieve the rig. I try to avoid casting where I think I could not retrieve the rig if I snag up.And if I have to kill the prime spot by recovering the rig, so be it. And I’ll make several drifts through a likely spot, changing things because you may not hit the ideal drift first, second or third time, you can identify a likely spot, but you have to SEARCH it to find if fish are there because you cannot see the dynamics of the currents without drifting your nymphs through several times. I was a fishery officer in the UK, the worst damage to wild life was caused by fly anglers, its not the nylon left in the tree, its the fly imitation, at nesting time, birds are in a rush to feed their young and grab at what they think are insects,and get hooked up. Always use barbless hooks in case you leave flies in a tree, its not a given that birds will throw the hook, but they have a better chance if its barbless. But always try to get the hooks and nylon out of there.

    Reply

Submit a Comment

Your email address will not be published. Required fields are marked *

Recent Articles

Recent Posts

Pin It on Pinterest