Troutbitten Fly Box — The Bunny Bullet Sculpin

by | Jun 13, 2018 | 31 comments

In a world of oversized, articulated streamers drenched in flash and draped with rubber legs, the Bunny Bullet is naturally sized and tied on a single hook — with just a little disco.

If the average modern streamer is an exotic dancer, then the Bunny Bullet is a stay-at-home Mom who gets shit done.

It’s olive. It looks exactly like something trout love, and it’s designed to look vulnerable. (It seems like an easy meal.) The cut points of the deer hair head provide the angler visibility from above, it fishes well with or without split shot, and it looks good stripped or drifted.

We’re on a mission from God.

There’s 106 miles to Chicago, we’ve got a full tank of gas, half a pack of cigarettes, it’s dark out, and we’re wearing sunglasses.
— Elwood Blues

Hit it!

Be sure to choose HD 1080p for best quality on the video above.

Bunny Bullet Recipe

Hook: Daiichi 2461, #4 (or similar)

Bead (optional): 4mm tungsten black nickel

Lead: about 10 wraps of .025” lead over the back half of the shank

Thread: Olive Danville Flat “A” (210 denier thread) to cover the lead, Olive Uni-Thread 8/0 for the back half of the fly, and Veevus GSP (50D) for the deer hair head.

Body: Hareline Dubbin Olive (HD11)

Rib: 5x tippet

Disco: Black Krystal Flash

Tail: Olive Magnum Rabbit Strip (trimmed to a triangle)

Gills: Hareline Dubbin Red (HD20)

Collar and Head: Olive Deer Body Hair (cleaned and stacked)

Belly of the Bunny Bullet


A Daiichi 2461 is the perfect choice for a single-hook streamer. I like it for the wide gap, black finish and straight eye.

I use a #4, but the same shank length is a #6 on most other streamer hooks. Importantly, the shank is 3 cm long, and the overall fly, from nose to tail, is about 6 cm (2.5 inches).

Because trout toy with streamers so much (since they swipe and turn, half-bite and spit our streamers) a super sharp point and a wide gap are especially important. The Daiichi 2461 has a gap that is extra wide, but not so much that it changes the weight or proportions of the fly. I also like the Aberdeen bend. Many popular streamer hooks (like the Gamakatsu B10s) have such aggressive hook bends that much of the shank is unusable — the bend of the hook takes over the fly. But the bend and gap on the 2461 is perfect.

I also like the black finish. Honestly, I’m not sure why we all use bronze finished flies anymore. Black is as stealthy as it can be. Why are we so accepting of flashy bronze hooks that add more shiny metal than a copper bead would?

Lastly, the straight eye lets a bead sit evenly on the hook (if one is used).

That’s a lot of love for my hook of choice. But it took a while to find my favorite, and I’m not looking back. Deviating much from the #4 Daiichi 2461 will change the fly.  The Tiemco 5263, #6 is a good substitute.


I add a tungsten black nickel bead to about half of my Bunny Bullets. For the other half, I simply tie the fly without one. I choose a bead rather than a cone for good reason. The bead allows the deer hair head to keep its mushroom shape, but a cone forces a taper into the head — and that’s no good. The 4 mm tungsten bead adds significant weight without changing the look or performance of the head (much).


I always wrap lead on the back half of the shank. I took this idea from the Chuck’s Sculpin a long time ago. Not only does the lead help get the fly down, it acts as a counterbalance and makes the fly teeter, (like a sculpin trying to find its bearings — yummy.)

This seesaw action is especially effective on versions without the tungsten bead. Split shot placed 4-8 inches in front of the fly constantly pulls the nose down when it’s allowed to sink, while the lead wraps bring the butt down as the head rises on a strip or jig. That’s a really great action.

Olive Hareline

No flash is necessary here. Just Olive Hareline dubbing looks a lot like the lighter underbelly of a sculpin when wet, and it provides good contrast to the rest of the fly.

Mono Rib

5X tippet gets the job done. Counter wrap the mono to hold the rabbit fur on a little longer, to protect the dubbing from big, sharp trout teeth.

Black Krystal Flash

One of my favorite materials for building flash into streamers, black Krystal Flash is subtle — but it’s there. It doesn’t add any extra motion to this fly, and that’s a good thing.

The Krystal Flash here serves to prop up the rabbit strip and keep it separate from the shank. That’s nice too.

Magnum Rabbit Strip

Here’s the motion. The rabbit strip brings the Bunny Bullet to life. It doesn’t need extra rubber legs or hackle to add motion. The rabbit strip undulates and breathes life into the fly. As I’ve argued before, our streamers do not need more motion than what a natural sculpin has. Just imitate the baitfish, and show the trout what they’re looking for.

Extend the strip so the fly is about 2.5 inches, from nose to tail. I taper the last quarter inch of the strip to a triangle. Keep the rabbit strip on top of the body and don’t let it roll to the side when you tie it in, or the streamer’s action will suffer on the retrieve.

A magnum sized strip is necessary. Thin pieces just don’t have enough fur to achieve the required motion.

Red Hareline

Why wouldn’t you? Red is a trigger for trout, signaling injury and life itself. You don’t need much. Just a short band behind the head finishes off the body of the Bunny Bullet.

Deer Hair Collar and Head

Deer hair heads on streamers will never go out of favor — because they catch fish. I’ve tried sculpin helmets and various materials to form a head on the Bunny Bullet, but nothing comes close to the production of deer hair for the head of this fly.

Importantly, the head should have a mushroom shape — not flat or triangular. There seem to be a few popular shapes for trimming deer hair heads. The Bunny Bullet doesn’t look right with any other shape. Look at a few sculpins in the palm of your hand. This is what they look like.

Tie in the collar with one clump of hair, then two other clumps for the head.

The head should not be dense. It doesn’t take much hair to form the profile. Just use what’s needed. Any more than necessary, and the head floats too much. The deer hair should not be packed tightly.

As a bonus, the angles at the tips of the cut deer hair reflect a little light and provide visibility to the fly. In shallower water, I often see the Bunny Bullet’s head. And for an olive fly, that’s an unexpected advantage.


I have a lot of stories about the Bunny Bullet, and many of them are scattered here across the pages of Troutbitten. Without question, it’s the best streamer in my box. (A couple year ago, it caught a 25” wild brown trout that I named Honey Bunny.)

It’s a natural, perfect match for the sculpins that trout feast upon. It’s a convincing, easy meal (when it’s fished that way). But it’s also a great searching pattern for big water — go ahead and jerk-strip it off the banks like you would retrieve an articulated beast twice its size, and see what happens.

More than most streamers, trout commit to the Bunny Bullet. They don’t just chase it — they eat it.

That’s a Bunny Bullet

For the record, my neighbor, Mark, named the fly. It took its final form back in the summer of 2001, as I sat perched at the kitchen counter, tying flies for a trip to Montana with Dad. After work, Mark walked through the side door and passed behind me. And on his way to the fridge, he stared at the streamer in my vise.

“That looks like a bullet,” he said.

“It’s mostly rabbit fur,” I replied.

“Well then it’s a Bunny Bullet,” Mark said flatly . . . and he handed me a beer.

Fair enough.

Fish hard.


Enjoy the day.
Domenick Swentosky



Share This Article . . .

Since 2014 and 600 articles deep
Troutbitten is a free resource for all anglers
Your support is greatly appreciated

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

Troutbitten Fly Box — The Jiggy Streamers

Troutbitten Fly Box — The Jiggy Streamers

With the Jiggy tied in, I quickly learned that nothing rides the bottom of the river like a ball jig. It bounces, canters, pivots and tap dances around rocks and gravel like nothing else. The ball itself is the key. It allows for some very unique presentations and movements. And when you really want to hug the bottom, you can set up your rig to feel those taps, as the Jiggy glides and scratches along the river bed.

That’s not to suggest that I constantly present a Jiggy deep down and glued to the rocks. Not at all. But when I do want to touch the bottom, to feel the rocks, hold a position or reach into the depths with precision, a Jiggy is the perfect vehicle. That is the key. That’s the special sauce of the Jiggy . . .

Troutbitten Fly Box — The Full Pint Streamer

Troutbitten Fly Box — The Full Pint Streamer

The Full Pint is one of the only permanent additions to my streamer box in the last few years. I test a lot of patterns against my confidence lineup, and very few flies make the cut. My box of long flies covers all the bases, really. And because I’m (mostly) a minimalist, I don’t add anything that is similar to other flies that I already carry.

But the Full Pint dazzled trout at the first dance. It had a big night the first time out. Then, day after day when I set the hook on a swirl or felt the jolting stop of a large trout slam the fly in mid-strip, I marveled at the Pint’s effectiveness . . .

Streamer Presentations — Why “Always Strip Set!” is a Fallacy

Streamer Presentations — Why “Always Strip Set!” is a Fallacy

Ahhh, the strip set. Nothing’s been beaten into the streamer angler’s brain more than the necessity for a good S-T-R-I-P  to set the hook. When a trout eats, always set with the line hand, not the rod hand! Never set with the rod. Right? Oh my, no. Never do that.

Call me wrong, but I use both a strip set or a short rod jerk all the time. Whichever one I’m in position for when a trout takes, that’s the one that happens. It’s all pretty natural and not something I think about much anymore. On a trout, both methods are equally as effective at driving the hook home, and I’m not about to change over to strip setting exclusively.

I tried. Honest. But because I use a lot of rod tip motion to animate the streamer (jerks, jigs and twitches), forcing a strip set when I’m an instant away from the next jerk is just awkward . . .

Streamer Presentations — Strips, Jigs and Jerks

Streamer Presentations — Strips, Jigs and Jerks

Using the rod tip is the other way to move a streamer. And I’ll argue that all jigs, jerks and twitches introduce some manner of slack . . .

. . . For my own streamer style, I welcome that slack. I use it for effect. I believe a streamer looks more alive — more natural — when it’s given a moment to rest, even if that moment is only a split second. Just a bit of slack allows our carefully-considered fur and feathers to puff and swoon with the current. Sure, a streamer has a similar chance to breath in-between strips too. But that look — that effect — is a little more dramatic when there’s no tension on the line . . .

Troutbitten Fly Box — The Sucker Spawn

Troutbitten Fly Box — The Sucker Spawn

You can get a trout’s attention with a host of different patterns. Bright beads, flashy materials, wiggly legs and sheer size all stand out in the drift, and trout take notice. But interest and curiosity do not necessarily lead trout into the net. In fact, many of the attention getting materials we attach to a hook simply turn trout off, giving them a reason not to eat the fly.

On the other hand, while drab and flat patterns have their moments, it often takes a little sparkle, a little color, flash or wiggle, to turn trout on. The trick then, is finding the right elements to seal the deal — a simple combination of materials that is just enough to convince a trout, but not too much either. Enter: the Sucker Spawn . . .

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.


  1. Real nice and relatively easy for an intermediate tyer. I enjoy your videos, too. There’s no tired old bullshit. Hey, I just want to know how to tie the fly. Who was singing and playing in the background. You knew someone would ask, ha!

    • Thanks Bruce. Yeah, fast motion is key. I don’t want to watch a 12 minute tying video either. 🙂

      The song is by my friends Ted McCloskey and Molly Countermine. You can see the song credits at the end of the video.

  2. Thanks a lot for sharing! Always been interested in this one!

  3. Any chance someone is willing to make some and sell these? Let me know!

    • How many do you want?

    • With due respect, I don’t feel it’s much like a Dahlberg Diver. The weight, the bead, the lack of hen feathers, the bunny strip, the krystal flash used as a prop, the dubbing, and the way the hair collar is cut are all different.

      But . . . everyone sees something different.

      Kinda had a discussion about that in a post last week:

      I don’t know what’s original, technically. And I’m just sharing a pattern that works for me.

      Also, cheers. I liked the stay-at-home Mom part too. 🙂

      • Domenick
        According to the new-fly classification system, your Bunny Bullet is an “original multi-cross”

        Meaning your fly has multiple desecendants: Dahlberg Dier; Zoo Cougar; Zonker; Muddler Minnow

        Either way, it looks like a real kick ass streamer to me.

  4. Great Sculpin, I cent wait to tie some up. How do you typically fish it- on a sink tip?

  5. Thank you for creating and sharing this awesome pattern! It really knocked em out today- drifted slow, stripped fast, upstream or downstream the big dogs couldn’t stay off it. Bravo

  6. Nice tie. A toned down kiwi muddler; different enough to give her a name. I’m going to have to get some magnum rabbit. Have you ever fished the Trow Minnow or Dore’s Mr. Glister?

  7. Ever fish these in black? I’m thinking it’d make a great night fishing fly

  8. Hey Dom Any chance of adding your Bunny Bullet to your shopping page or getting someone to ty them for sale Thanks Brian Mac

    • Hi Brian. Yes, Troutbitten flies will happen. I’ve been working with some people for over a year to get enough product ramped up. Things like this year a lot of time. But I’ll get there.

  9. Doesn’t it ride hook side up being your using a jig hook? Is belly facing up? thanks great articles

  10. Nice tie for a beginner like myself. Looking forward to getting it wet. I already had some success with your full pint and am sure I can move a few with this one. Thanks for sharing your knowledge.

  11. Hi Dom

    Sorry to go on about the Bunny, but I don’t think it’s clear how it lies in the water. I saw your answer to Eamon above, and also went on to read :

    But even that is not conclusive, although you do say the Bunny tied on a jig hook is likely to travel right side up due to materials, etc.

    I think the inference is that the Bunny travels right side up? Please confirm.

    It would help to attach a picture of the Bunny in water in the reference above when you do update the piece.

    Kindest regards.

    • Hi David. Thanks for the question.

      The Bunny Bullet rides hook point down — not inverted.

      The jig inversion article you referenced is about nymph hooks.

      The Bullet rides normal because the hook is longer and thicker than standard.

      The Bullet also rides normal because of the materials. The head and the tail force it that way.

      I welcome you to test for yourself, and share the pictures here.


  12. Many thanks Dom. Will do, materials coming. Appreciate the reply.
    By the way, who is the artist singing when you’re tying the Bunny?

    • Sure thing.

      Good friend of mine. Ted McCloskey. Credits are always there in the info below the video.


  13. Dom – thank you for the article and video on this pattern. Do you ever tie/fish this in other colors (i.e. brown, black, tan) and, if so, how have those colors performed?

    Thanks, Nate

    • Hi Nate,

      I have tied and fished other colors. It never made a difference in hook ups.



Submit a Comment

Your email address will not be published. Required fields are marked *

Recent Articles

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

Pin It on Pinterest