Fifty Fly Fishing Tips: #43 — Two Ways to Recover Slack

by | May 27, 2018 | 5 comments

Much of what we learn about fly fishing comes from instinct. Fishing, after all, is not that complicated. It does not take a special set of talents or years of study to figure most of this out for yourself. It just takes a tuned in, heads up approach out there on the water, and a good bit of want-to.

Being self-taught has its own rewards, namely a certain individual satisfaction about doing and discovering things your own way. I would argue, however, that no one is fully self taught. And the motivated anglers I know all seek out information from a variety of sources to improve their game.

I like to think that this Fifty Tips series and the Troutbitten site as a whole caters to the ambitious kind of angler — the one who takes pride in fishing hard and digging deep for new resources, mining information about the next small (or large) adjustment which hooks more trout to the line.

And many of these adjustment, these tips or discoveries, are downright obvious. They’re the kind of things that you certainly would figure out on your own if you thought about it long enough. They’re the things you already know, inherently, but perhaps haven’t thought about in much detail. And within these simple things are the keys to the greatest discoveries — your biggest steps forward.

So here’s a “Duh” tip that has big consequences:

There are two ways to recover slack after the cast: stripping in line or lifting/moving the rod tip.

I would never suggest using either method exclusively, of course. There are times to use both, because each method comes with its own caveats.

Here are two scenarios for consideration.

Nymphing

Say you’re tight line nymphing with the Mono Rig, directly upstream — and I do mean directly. You are casting thirty feet, perfectly upstream of your position, into a pocket behind a midstream boulder. You’re allowing a pair of nymphs to be carried downstream with the current, in one seam. To keep those nymphs in just one seam, on a tight line, you must keep the rod tip in that same vertical plane, above the water and guiding the flies back downstream.

You cast and then recover the slack returned to you by gradually lifting the rod tip straight in front of your position.

Now, after about five to ten feet of drift, your rod is vertical — the tip is pointed to the sky. You have nowhere to go to recover more slack, so you must cast again, right?

Not quite. Now’s the time to remember that the line hand can also recover slack. And if you use the line hand in conjunction with the lift of the rod tip from the beginning of the retrieve, you can obtain an extra five to ten feet of effective drift.

Dry Fly Fishing

Let’s say you’re fishing a slow flat, with a relatively even top current from bank to bank. You’re casting thirty feet of fly line and a nine foot leader, punching a Klinkhammer dry fly into a downstream breeze toward the sporadic rises shown by a pod of wild brown trout.

After the cast up and across the stream, your rod is parallel to the surface, and you begin recovering the slack by raising the rod tip.

That’ll work, until you encounter a problem. As you raise the rod tip, the weight of the fly line hanging from the rod tip is pulled down by gravity. That unavoidable pull of the hanging line tugs unnaturally on the fly line remaining on the water, which in turn pulls on the leader, straightening out the the slack you’ve so artfully given the dry fly with your George Harvey Dry Fly Leader. The stiff breeze blowing downstream pushes against your hanging fly line and only makes the problem worse. Your effective drift length is therefore shortened.

It takes a half dozen of these abbreviated drifts before your angler’s instinct kicks in. Then instead of raising the rod tip to recover slack, you keep the rod tip low, right next to the surface, allowing more fly line to remain on the calm water. In turn, you remove the elements of wind and gravity and are helped along by the even currents. Your effective drift is lengthened by more than ten feet and you start catching twice as many fish.

Nice.

Simple Thoughts

Again, so much of what we do out on the river comes back to the basics. It’s a simple, intuitive game where all advanced techniques have their kernel in simplicity.

Sounds like just about every other sport out there, doesn’t it? The grand gateway to advanced techniques is a simple step through a common man door.

Fish hard, friends.

 

Enjoy the day.
Domenick Swentosky
T R O U T B I T T E N
domenick@troutbitten.com

 

 

Share This Article . . .

Since 2014 and 600 articles deep
Troutbitten is a free resource for all anglers
Your support is greatly appreciated

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

New Structure | Old Structure

New Structure | Old Structure

One of my favorite places in the world is a deeply shaded valley that runs north and south between two towering mountains of mixed hardwoods. The forest floor has enough conifers mixed in to block much of the sunlight, even in the winter. The ferns of spring grow tall, and thick moss is spread throughout. The ground remains soft enough here that all large trees eventually surrender to the valley. When they can no longer support their weight in the soft spongy ground, they fall over, leaving a broken forest of deep greens and the dark-chocolate browns of wet, dead bark. It’s gorgeous.

Fallen timber also dictates the course of this cold water stream. The fresh tree falls force the creek to bend away from the hillside. Rolling water carves away the earth and lays bare the rocks — these stones of time, as Maclean puts it. And when water cuts into a neighboring channel, previously dry for centuries, new river banks are undercut and fresh roots exposed . . .

Light Dry Dropper in the Flow

Light Dry Dropper in the Flow

. . .The flow of the fly line through the air is finesse and freedom. Contrasted with nymphing, streamer fishing, or any other method that adds weight to the system, casting the weightless dry fly with a fly line is poetry.

The cast is unaffected because the small soft hackle on a twelve-inch tether simply isn’t heavy enough to steal any provided slack from the dry. It’s an elegant addition that keeps the art of dry fly fishing intact . . .

Streamer Presentations — The Cross-Current Strip

Streamer Presentations — The Cross-Current Strip

There are a lot of ways to retrieve a long fly after the cast. And that’s really what’s so much fun about the streamer game. Fly anglers might spend hours fretting over the imperfection of a drag free drift on a dry fly or twice as long considering the depth and drift of a nymph, but when the streamer is tied on, it’s a chance to let loose. Nothing else in fly fishing allows for such freedom of presentation. “Everything works sometimes.” No other fly type fits that tenant so well.

But what will trout respond to most? That’s the question. And on many days — most perhaps — the answer is a cross-current strip. Here’s why . . .

Streamside | Dave Rothrock’s Drop Shot Video

Streamside | Dave Rothrock’s Drop Shot Video

I get a lot of questions about drop shot nymphing, and though I’ve mentioned it countless times in other Troutbitten articles, I’ve never devoted a whole piece to it. Why? Probably because it would take a full series of articles and many diagrams to convey my own take on drop shot nymphing. I’m sure I’ll get to it someday, but for now, here’s a quick rundown of my own drop shot thoughts, followed by a link to Dave Rothrock’s new video, How to Set Up a Drop Shot Nymphing Rig . . .

Dry Fly Fishing — The Pre-Cast Pickup

Dry Fly Fishing — The Pre-Cast Pickup

The pre-cast is a simple motion that lifts some (or all) of the fly line off the water and gets the leader moving. It’s an elegant solution to a common problem.

When the dry fly drift is over, simply activate the line and get it moving before starting the backcast. The motion of the pre-cast pickup breaks the hold of surface tension. And that’s the key. Once the surface lets go of the line, it is easily lifted off the water with minimal disturbance . . .

Dirty Water — Tight Targets

Dirty Water — Tight Targets

. . . If visibility is twelve inches or less, well then, things are pretty muddy.

Today, visibility was at least twice that. And I’m not saying it was clear enough for trout to make out details at two feet, but if you dunked your head under the water and looked upstream, you could probably see shapes coming from about twenty-four inches away. And if those shapes looked like food, you might be interested. Maybe not.

I have a bunch of tips for fishing this kind of water, and I’ve learned to enjoy the challenge. But all of my tips start with this . . .

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.

5 Comments

  1. Great tip.

    Reply
  2. Wow! Awesome blog post with great tips! In this article, you offer great tips for us about fly fishing. Thanks for sharing!

    Reply
  3. best blog I’ve found on fly fishing. thank you very much

    Reply

Submit a Comment

Your email address will not be published.

Recent Articles

Pin It on Pinterest