Fifty Fly Fishing Tips: #41 — Face Upstream

by | May 6, 2018 | 13 comments

I’m not sure why, but it seems that part of the anglers’ DNA is to face the stream sideways. Some guy with a rod walks up to the creek, faces the opposite bank and watches the water flow from left to right. He casts up and across, then drifts the fly / bait / lure until it’s down and across from his position. Everyone does it. Repeat ad infinitum and catch a fish once in a while. But to catch more trout, face upstream.

Most of this applies to dead drifting things to a fish, which if you’re fishing for trout, is arguably the most effective and consistent way to put fish in the bag. Dry flies and nymphs (and often wet flies or streamers) are most useful when delivered upstream and allowed to drift along with the current, without much influence from the line and leader that carries it. The dead drift is the first and most basic lesson of Fly Fishing 101.

READ: Troutbitten | See the Dead Drift

And the easiest way to get that dead drift happening is to face upstream.

One Seam

We need our flies coming down through just one current seam. That’s the only way a real dead drift is performed. When the attached line drags the fly across lanes, bad things happen. The fly looks unnatural. It speeds up and travels across seams in a way that most trout food sources do not.

Casting across the water immediately puts the fly and the the leader at odds. They fight one another when influenced by the currents of multiple seams, and it’s very difficult to get a true dead drift this way.

But casting upstream results in an entirely different setup. The fly, leader and line can all land and drift in one seam. And there’s your dead drift. Bingo — fish on.

Anglers facing across stream tend to cast across stream. Anglers facing upstream tend to cast more upstream. It’s that simple. If you face upstream, into the current, you will more often setup the flies for a solid dead drift.

I’ve seen season after season, that casting across stream is a very hard habit for some anglers to break. And the best way to change the casting direction is to change the body position. Face upstream, and you will find targets upstream. Face across stream and, well . . .

Here’s the last thing to think about: We don’t need to cast directly upstream and in the same seam that we’re standing in. If our rod is ten feet long, we can cast upstream and ten feet across. We can then lead the flies down one current seam with the rod tip — ten feet out into the current. This is an essential concept for tight line nymphing, but it applies to dry fly fishing just as well. Because while using fly line, some of that line must often lay on the water’s surface. And if we keep all of that fly line in one current seam (the same seam as our fly), then the drifts are long and the fishing is easy.

READ: Troutbitten | One Great Nymphing Trick

Keep that one in your boot. Face upstream. It’s a good one to remember.

Fish hard, friends.

 

Enjoy the day.
Domenick Swentosky
T R O U T B I T T E N
domenick@troutbitten.com

 

Share This Article . . .

Since 2014 and 600 articles deep
Troutbitten is a free resource for all anglers
Your support is greatly appreciated

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

Fifty Fly Fishing Tips: #45 — The Dry Fly is a Scout

Fifty Fly Fishing Tips: #45 — The Dry Fly is a Scout

The fly is an explorer tied to the end of a string. It bounds along with the current, making discoveries and telegraphing its collected information back through a line. Whether nymph, streamer, wet or dry, our fly is an investigator sent forward to probe the water and search for trout — and to collect more information than our eyes can see.

Standing riverside, pinching the hook of a caddis dry fly between forefinger and thumb, with slack line and a rod poised to send our fly on a mission, we scan the water for signs. We look for rising trout and likely holding lies. And we look for  much more than is easily visible. The currents of a rocky, rolling river are a converging and confusing mix. And what we may decipher through polarized lenses is a mere scratch of the surface. So we send a pioneer.

Fifty Fly Fishing Tips: #44 — From the Wrist to the Rod Tip

Fifty Fly Fishing Tips: #44 — From the Wrist to the Rod Tip

I’ve not taken a fly casting class. I’m not Federation of Fly Fishers certified, nor do I have any similar credentials. But I daresay I can put a fly just about where I want it, within a reasonable fishing range of, let’s say, fifty feet.

I can land a Parachute Ant in a small shady pocket, upstream of the overhanging limbs and downstream of the rock. And perhaps more challenging, I can usually land two nymphs in one current stream on a tight line, with the point fly directly upstream from the tag fly — and that’s with a moderate tuck cast providing just an instant of slack.

Is that bragging? I hope not. But lacking the aforementioned credentials, I figure I should at least state my competence for your judgement before offering any advice.

So with that preamble delivered, here’s tip #44: Good casting happens from the wrist to the rod tip. . . .

Fifty Fly Fishing Tips: #43 — Two Ways to Recover Slack

Fifty Fly Fishing Tips: #43 — Two Ways to Recover Slack

Much of what we learn about fly fishing comes from instinct. Fishing, after all, is not that complicated. It does not take a special set of talents or years of study to figure most of this out for yourself. It just takes a tuned in, heads up approach out there on the water, and a good bit of want-to.

There are two ways to recover slack after the cast: stripping in line or lifting/moving the rod tip. Use both at the right times . . .

Fifty Fly Fishing Tips: #42 — Work into the Prime Spots

Fifty Fly Fishing Tips: #42 — Work into the Prime Spots

The trout were on. They started with nymphs, but as soon as the emerging tan caddis popped to the surface, a green summer morning turned into something special.

Steve was the first to switch to dry flies. Around 9:30 a.m. I leapfrogged his position again and stopped to visit for a moment. Steve spoke as I approached.

“Man, these are the days you dream about,” he said while casting.

Standing in the creek, not far off the bank, he glanced over his left shoulder in my direction, judging the length of his fly line against the back casting space I’d left him. And I continued wading closer to my friend in the ankle-deep water.

“You switched to dries?” I used the statement as a question . . .

Fifty Fly Fishing Tips: #40 — The Trout is Upstream of the Rise

Fifty Fly Fishing Tips: #40 — The Trout is Upstream of the Rise

Anglers love to talk about trout rise forms. There’s the subtle sip and the tail tip, the splashy swirl and the sideways swipe. Surely, all the various ways trout rise to the surface indicates something about what they’re actually feeding on. But regardless of the rise form, one primary rule (usually) applies: The trout is holding upstream of where you saw it rise.

Let’s imagine a trout holding in two feet of water with a medium current — a speed that matches a comfortable and casual walking pace. The trout lies on the bottom, with its nose in the flow, watching for available food drifting downstream toward it. Perhaps the trout is keying on Sulfur mayfly duns, and it’s rising confidently to most of the half-inch, yellowish insects that drift into view of its seam.

Here comes the next dun . . .

Fifty Fly Fishing Tips: #39 — Look Upstream to Find the Seams

Fifty Fly Fishing Tips: #39 — Look Upstream to Find the Seams

The river is in motion. It carves a path that erodes its rocky bottom and gnaws at its bordering banks. It cuts lanes and moves channels, constantly shaping the valley into something new. And within the river’s path is structure — all the things that give a river character: logs, tree parts, rocks, boulders, gravel bars and rootsy banks. That structure forms seams where trout live. (Find the seams and you’ll find fish.) And the best way to see them . . . is to look way upstream.

The structure in your favorite large river or small brookie stream creates seams extending well beyond what is obvious. The two distinct lanes running along each side of a midstream boulder create a third zone, a stall, right in the middle. It’s easy to see those three water features up close to the rock, but the further downstream the water travels, the more those features fade and blend into each other. And such is the beauty of a trout stream.

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.

13 Comments

  1. Great post: probably the best advice one could offer anglers. Add to it the admonition to keep casts short and you have a graduate course in fly fishing.

    Reply
    • There ya go. Two tips. That’s all you need. 🙂

      Reply
  2. Another great reason to use that mono rig and keep that fly line on the reel.

    Reply
  3. Another thought: the effectiveness of fishing upstream may be one of the reasons for the effectiveness of using a strike indicator or suspension device. As you have said on numerous occasions, a bobber tends to lead your flies downstream behind it, making the effective cast upstream even if the actual cast is more across stream.. BTW, I think that this is one of the main reasons for the success of the Prove bounce rig.

    Reply
      • Still catch lots of fish swinging 3 wet flies “down & across”. lazy & relaxing way to fish.

        Reply
        • Oh, I agree. If you find the right trout and the right situation, swinging flies down and across can work great. But over the wild trout around here, a dead drift produces far more often. It also brings to hand larger trout.

          But many areas are different.

          Cheers.
          Dom

          Reply
  4. I was anonymous.

    Alex

    Reply
  5. My best trout monoriggin came from a cast upstream about a rods length across, once I got the line retrieve thing down. Force yourself. DO IT !!!
    Thanks Dom.

    Reply
  6. Thank you for this! What a simple solution. Even though I cast nymphs upstream, I find that they spend more time fishing water next to me instead of above me, even though I always cast upstream. This simple tip will fix that problem.

    Reply
  7. I read this year after year. I agree with you. Old habits are hard to break.

    I fished a small stream in Idaho last week. Water was very low. I used this technique and it did work. Unles the best seam was across the stream. I had success both wAys but my best luck was facing up stream. Thanks for the reminder

    Reply
  8. I have just recently encountered this web site and really enjoy the philosophy and lessons posted. I am not an “Old master” fly fisher even though I have been fly fishing for over 50 years. I was born and raised in Butler PA and went to college at Penn State so I’m familiar with the waters you address. Yes I fished PA until I joined the Air Force and ended up in Idaho. I bought a 9′ Garcia fly rod soon after arriving and did not pick up a spinning rod until 4 years ago when I started steelhead fishing in the Clearwater River. Now my goal is to learn how to swing cast my 14′ spay rod and hook up with a B run steely. I have fond memories of fishing Mahoning and Redbank Creeks. I caught my first trout in Leatherman Creek. I did a lot of fishing but little catching. Your discussions concerning mixing wild trout with hatchery raised has struck a note with me. Not because I encounter stocked trout in reservoirs I fish in the spring. I rarely encounter stocked trout in the rivers I fish for Cutthroat. However, I do encounter hatchery raised steelhead. I can clearly tell the difference in the fight of a wild steelhead from a hatchery. Fortunately, Idaho does not permit harvesting wild steelhead. Washington has even taken legal action to stop the WDFW from releasing hatchery steelhead in some coastal rivers. From your discussions, I realize how fortunate I am to catch wild Cutthroat.

    Reply

Submit a Comment

Your email address will not be published. Required fields are marked *

Recent Articles

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

Pin It on Pinterest