Streamside | DIY Shake Fly Floatant via Living Fly Legacy

by | May 8, 2017 | 5 comments

A few years ago I took a chance and bought thirty-two ounces of powdered, fumed silica from an ebay seller.

“What the hell is that?” You might ask.

It’s the fine, white powder used for drying flies and keeping them riding high on the surface. The ebay listing came with an assurance that the stuff was just like the Frog’s Fanny we buy in fly shops. It was. And it still is. Even after gifting many of my friends with small bags of the magic powder, and re-filling my own bottle countless times, I still have half the quart left.

Each season I end up losing the bottle somewhere on the river or in transit, so I go to my fly shop and buy another bottle of Frog’s Fanny that I refill with the quart when it’s empty. Sure, I could probably find a ten-pack of empty bottles with little brushes on the caps real cheap on ebay too. But I feel like I better pay it forward once in a while to the fly shops and the people who came up with the idea in the first place. So yeah, I’m cheap, but not that cheap.

Chris Cutler writes the blog, Living Fly Legacy, and it’s one of my favorites for a lot of reasons. I like that Chris night fishes, and he thinks outside the box. I particularly like his point that night fishing with mice is a sham (check that one out). But I digress. I like Chris’s creativity and his do-it-yourself independence.

So I was pleasantly surprised to see that Chris had also bought way too much white powder in a bulk container. But he took it a step further. In his latest blog post, Chris details how to make your own little shaky dry fly bottle with all the powder and pebble pieces needed to suck your flies dry and get back to fishing the surface. Nice.

Here’s the article link.

Open container — insert damp fly here. And the DIY holster. — Photos from Chris Cutler

And here are some excerpts:

… The material is called fumed silica. It is a common additive in epoxies as a thickening agent. It is remarkably hydrophobic.

… The next thing you will need is some Silica Gel (balls). This is usually easy to come by if you know where to look.

… The last thing you need is some type of container. I chose an old film canister. It was the perfect size.

In characteristic form, Chris lays out the whole thing and makes it easy to do-it-yourself too. Good stuff.

Thanks, Chris.

Enjoy the day.
Domenick Swentosky

Share This Article . . .

Since 2014 and 1000+ articles deep
Troutbitten is a free resource for all anglers.
Your support is greatly appreciated.

– Explore These Post Tags –

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

More from this Category

Depth, Angle, Drop: Three Elements of a Nymphing Rig

Depth, Angle, Drop: Three Elements of a Nymphing Rig

Good nymphing is both an art and a science. When an angler first dives into the nymphing game, the technical challenges (the science) may dominate. All the options for rigs and modifications may be confusing for a while. It might take years, but eventually we get comfortable enough that all the adjustments become second nature. At that point, I think art can take over once again.

Each of the three elements influences the others. They are interactive and woven together . . .

Holding a Trout — Their Heart in Your Hands

Holding a Trout — Their Heart in Your Hands

Fish pictures are the grand compromise of catch and release. An Instagram feed with a full gallery of trout is replacing the stringer of dead fish for bragging rights. And that’s a good thing. They look better alive anyway.

Would a trout be better off if we didn’t take its picture? Sure it would. Moreover, wouldn’t a trout be better off if we didn’t set a hook in its mouth and drag it through the water? Yup. So I think we have to be a little careful how self-righteous we get. Point is, we all draw the line somewhere, and I firmly believe that a quick picture, taken responsibly (I’ll get to that), won’t hurt a trout.

Most of the fishermen I know who’ve spent a great deal of time with their boots in the water have caught on to catch and release. The bare facts stare you in the face pretty quickly if you start keeping your limit on every trip. You soon realize that a good fisherman can thin out a stretch of water in short order, and a group of good fishermen can probably take down an entire watershed.

So we take pictures instead . . .

Trail This — Don’t Trail That

Trail This — Don’t Trail That

Last week, my friend sent the picture of a plump, wild brown trout, including the caption, “He took the Green Weenie off the trailer, just like you said!” And I immediately cringed. I never run the Weenie off a trailer — unless it’s very small, beaded and tied with...

DIY Spool Tenders via Tightline Productions

DIY Spool Tenders via Tightline Productions

  A plastic tube, some elastic braid, and some heat shrink tubing. After a quick trip to the hardware store and a little time with a glue gun, I’ve now resolved a problem that has plagued me since I was ten years old. Thanks, Tim Flagler. Tim’s growing collection...

What do you think?

Be part of the Troutbitten community of ideas.
Be helpful. And be nice.


  1. There are many varieties of fumed silica. I did a bunch of research a few years ago and found what I believe to be the best formulation (Cab-o-Sil TS-270) for our needs. And I found it availble for $10/qt plus shipping here:

  2. Doh: Can-O-Sil TS-720. I mistyped in the above comment.

    • Thanks for the reference, Mark! I have another friend who is particular about the type as well. I only bought the stuff once, and I must have gotten lucky. Thanks for sharing your research. Very helpful to everyone.

  3. Not all fumed silica will work. There are two common kinds hydrophilic and hydrophobic. There are several brands out there the most common is CAB-O-SIL the standard M5 grade is hydrophilic you need the TS-720 which is hydrophobic. The hydrophilic powder will make a paste that just doesn’t work well. You can find the hydrophobic powder for about $30 a lb, or a gallon jug. That will fill more than 50 of the dry shake bottles from Loon or Orvis. If you are lucky enough to have an unlimited supply of the silica gel packs you can make your own floatant for almost nothing. I asked a young lady at a shoe store to save a small pile of the gel packs for me, in one week I had a coffee can full which again is enough for 3 lifetimes of floatant. I give them away to friends and I have a handful in my truck that I give to newbies. I could probably sell them but I don’t. Tight lines all!

  4. Cal; Enjoyed your comment but are you saying the silica jel packets make good floatant ?? Do you crush the particals or what ? Very interested .

    Another thought or question, can I possibly use diametric earth, I use it in my chicken coop for mite control and it is very powdery?/


Submit a Comment

Your email address will not be published. Required fields are marked *

Recent Articles

Recent Posts

Domenick Swentosky

Central Pennsylvania

Hi. I’m a father of two young boys, a husband, author, fly fishing guide and a musician. I fish for wild brown trout in the cool limestone waters of Central Pennsylvania year round. This is my home, and I love it. Friends. Family. And the river.

Pin It on Pinterest